Trevi DAB 793 R Handbuch Seite 16

select DAB mode and start a quick scan of the DAB channels to search
for available stations. Please leave it to complete this process;
4. Press TUNING > (11) or TUNING < (12) to select desired station;
Note: You may have to wait for the unit to tune into the new channel.
5. Press SCAN button (4) can fully scan the available channels again.
Manual Scan
1. Hold INFO/MENU button (3), the display shows "Manual", then press
SELECT button (13);
2. Press TUNING > (11) or TUNING < (12) to select desired channel
(5A-13F), press SELECT button (13) to enter the channel;
3. Select station by using TUNING > (11) or TUNING < (12).
DAB Radio Stations Preset
You can store the frequencies of up to 10 radio stations in the memory.
A stored frequency can be erased from the memory by storing another
frequency in its place.
1. In DAB or FM mode, tune to your desired station;
2. Hold PRESET button (14) until the display Preset Empty with flashing
1-10 (1-10 is the preset position number);
If the preset number is empty, "Preset Empty" is shown.
If the position is saved with station, station frequency is shown.
3. Press TUNING > (11) or TUNING < (12) to select the desired memory
location;
4. Press SELECT button (13) once to confirm and save the selected station;
5. To listen to a preset station:
• Press PRESET button (14) once,
• Press TUNING > (11) o TUNING < (12) for selecting your desired
station.
TRANSMISSION INFORMATION DAB/DAB+
In DAB mode, the display will show a series of information about the
current radio station.
1. Press the MENU/INFO button (3) to change the displayed information.