Ace instruments AFM-5 Bedienungsanleitung Seite 10

This way you receive results that are as accurate as
possible:
a)
Wait at least 15 minutes after your last sip of alcohol. Do not eat,
drink or smoke during that time.
b)
Do not open the casing.
c)
Do not keep the ACE AFM-5 Breathalyzer in cold, hot, moist or
badly ventilated places.
d) Keep the ACE AFM-5 Breathalyzer out of the reach of children.
e) Conduct three inlet tests after long storage before conducting
the actual alcohol test.
f) Do not drop the ACE AFM-5 Breathalyzer.
g) Change the battery if it is depleted. Diminished battery capacity
leads to incorrect test results.
h) Do not conduct tests in loud (sound waves disrupt the sensor),
drafty or poorly ventilated places.
i) After a test result of 1.000 per mill (per mill = EU setting) / 0.100
% BAC (% BAC = US setting) / 0.500 mg/L (mg/L = UK setting) or
higher the sensor needs rest time. In this case wait at least three
minutes before starting the next test.
j) Do not conduct tests in very cold, very hot or an unventilated,
smoky ambience.
k)
Store the ACE AFM-5 Breathalyzer in a way to avoid penetration
by dust or liquids.
l)
Blowing too hard may cause damage to the sensor as saliva
flows into it.
Preparation for the test:
1. Installing a battery
Step 1. Push up the bottom part of battery cover to open it.
Step 2. Install an AAA battery in the battery compartment while
taking note of the battery polarity.
Step 3. Insert bulging parts of the battery cover into the slits,
and then push down its cover.
2. Inserting a mouthpiece
Insert a mouthpiece into the slot on the side of the alcohol tester.
Ensure whether it securely fits or not. It is highly recommended to
use an extra mouthpiece for every test for sanitary reasons.
3. Installing the ACE Instruments AFM-5 app
Step 1. Download the "Alcofind" app from App store (iOS) or
Google Play Store (Android). Note the minimum smartphone
requirements: Either an iPhone 4S running iOS 7 and above or
Android devices running OS 4.3 and above.
Step 2. Open the app. Select language and unit, then press "OK"
button. NOTE: For changing language and unit later, go to setting
at the bottom menu.
Operation with App (App mode):
Step 1. NOTE:
Open the app.
on in order to connect to the ACE Instruments AFM-5. (Go to the
settings on your smartphone and turn on Bluetooth.)
Step 2.
To turn on the ACE Instruments AFM-5, press and hold
Power button for a second until the Blue, Green and Red LEDs
appear on the device as shown in the picture below.
Step 3. The Blue LED will blink during pairing process. If pairing
is successful, Green and Red LEDs will appear on the device and
the screen on your smartphone will show "START TEST". Tap
"START TEST" on your smartphone (or press Power button on
the ACE Instruments AFM-5).
NOTE: In case of the first pairing process, a PIN Code request
will be displayed. Type in "000000" as PIN Code.
NOTE: The app is set to remember and search the device which
has paired last time for 30 seconds. If the app is not able to find
the previously paired ACE Instruments AFM-5 for 30 seconds,
the app will show a request message. If you want the app to find
another ACE Instruments AFM-5, press "OK", and if you want
the app to keep finding the previously paired ACE Instruments
AFM-5, press "Cancel".
Step 4.
Choose a user. Each test result will be saved separately
according to the selection of the user. All history of saved test
results are viewable from the Graphic Icon at the bottom of the
menu.
Step 5. The circular bar on the app indicates the progress of
Bluetooth must first be switched