Terdens 2017 Handbuch Seite 15

5) After date setting, the Week will be automatically set.
6) At normal mode, press "UP" key to change the display of 12hr or 24hr.
7) Press and hold "UP" key for 3 seconds to switch between Year and Day of Week
display
8) If you do not operate within 8 seconds, it would return to normal mode.
Alarm setting
1) At normal condition, press the "ALARM" key 3 seconds and with a "BI" sound to
enter the alarm setting mode, press UP/DOWN to adjust.
2) Press "ALARM" key to confirm the setting and back to normal condition.
3) At normal condition, press "ALARM" to turn on/off the alarm. The alarm will be on or
off with the "
SNOOZE
1) When alarm on, press "SNOOZE" key to stop alarm and activate snooze function.
2) Press "ALARM" to deactivate the snooze function.
Outdoor temperature alert setting:
1) At normal mode, press "ALERT" one time, the temperature alert will be on/off with the
" " appear/disappear.
2) Press "ALERT" key 3 seconds then the outdoor temperature and "▲" are flashing,
then press" CH" key to choose the channel you need to set.
3) Use "UP" or "DOWN" key to set the maximum temperature alert your need, then
press "ALERT" key to confirm and enter into minimum alert setting.
4) Follow the above setting to continue the min temperature setting. It is the same way of
setting max temperature.
5) Last, press "ALERT" to exit.
6) If this product with more than 1sensor, and you want to adjust the others channel
temperature alert, please follow the Step B again.
7) If you do not operate within 8 seconds, it would exit to time model.
8) At setting mode, hold "UP" or "DOWN" keys over 3 seconds to quickly adjust it, and
the adjusted program will stop flashing.
Notes:
1) The default of RF outdoor temperature: –25 ºC to +70 ºC or -13 ºF to 158 ºF.
2) Temperature alert setting: the lowest alert temperature should be at least 1ºC less
than the highest temperature.
3) When the temperature is below -25 ºC, it shows LL% on the screen. Humidity detect-
ing range is 20%~95%. When the humidity is below 20%，it would shows LL% on the
screen, when it is higher than 95%, it shows HH%.
4) When the current channel temperature alert, the signs of the temperature and alert
are flashing with 1HZ frequency. If the other channel alert, the alert sign flashing only.
5) When the temperatures are in alert state, the corresponding temperature and alert
sign are flashing simultaneously.
6) As alarming, please press any keys to stop the alert firstly, and then press "ALERT"
key to turn off the alert. The alert sign will disappear.
7) If the temperature alert and time alarm are work in the same time, the time alarm
working firstly.
" appeared or disappeared.