General Guidelines; Installation - HQ Power ARAS 150S Bedienungsanleitung

3.

General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.

Familiarise yourself with the functions of the device before actually using it. Do not allow operation by
unqualified people. Any damage that may occur will most probably be due to unprofessional use of the device.

All modifications of the device are forbidden for safety reasons. Damage caused by user modifications
to the device is not covered by the warranty.

Only use the device for its intended purpose. All other uses may lead to short circuits, burns, electroshocks,
lamp explosion, crash, etc. Using the device in an unauthorised way will void the warranty.

Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.

Mechanical wear and LEDs are not covered by warranty.

A qualified technician should install and service this device.

Do not switch the device on immediately after it has been exposed to changes in temperature.
Protect the device against damage by leaving it switched off until it has reached room temperature.

This device is designed for professional use on stage, in discos, theatres, etc.

Use the appropriate power supply (see Technical Specifications below).

Lighting effects are not designed for permanent operation: regular operation breaks will prolong their lives.

There may be some smoke or a particular smell when the device is activated for the first time. This is
normal and any smoke or smell will gradually disappear.

Use the original packaging if the device is to be transported.

Keep this manual for future reference.
4. Features
The ARAS 150S is a super-powered LED moving head with one 150 W Luminus LED. It includes a colour
wheel and two rotating gobo wheels and produces the brightness of a traditional 575 W moving head.
The fixture comes with two pairs of ¼" fast locks and Omega brackets for easy horizontal or vertical

installation.


fixed and rotating gobo wheel + open gobo

colour wheel with 7 colours + white

3- and 8-facet dual prism

auto focus, frost and iris

16-bit movement resolution for pan (540°), tilt (270°) and auto position correction

silent cooling

stand-alone and built-in demo sequences

clear LCD display for easy menu setting
5. Overview
Refer to the illustrations on page 2 of this manual.
1 3-pin DMX input
2 3-pin DMX output
3 5-pin DMX input
4 5-pin DMX output
6. Installation
Safety

Before mounting the product, read and follow the safety recommendations indicated in the Safety
Instructions.
Rigging

Overhead mounting requires extensive experience: calculating workload limits, determining the
installation material to be used... Have the material and the device itself checked regularly. Do not
attempt to install the device yourself if you lack these qualifications as improper installation may
result in injuries.
V. 01 – 29/06/2015
VDPL150MH21
5 power input
6 power output
7 on-off switch
8 fuse
5 ©Velleman nv