Technical Characteristics; Installation; Operation And Use - GFC VAVA Gebrauchs - Und Wartungsanweisungen

di gianfranco conti - 20021 Bollate (MI) ITALY - Viale Lombardia, 18 - Telefono (02) 38302386 r.a. - Telefax (02) 38302389

2 - TECHNICAL CHARACTERISTICS

2.1 - Technical characteristics and performance
Performance
Variable cycles length, according to bending necessities of frames
Voltage
Frequency
Installed power
Fuse
Machine weight
2.2 Overall dimensions
Dimensions
Machine length
Machine width
Machine height

3 - INSTALLATION

3.1 - Setting up
The machine is supplied already assembled and ready for operation.
The packaging includes:
a) the machine
b) feed cable
c) operating instructions
N.B. - With regard to VISPA and VISPA UP the feed cable is connected directly to the machine.
Owing to its particular nature, the machine can be handled manually without necessitating further
devices.
3.2 - Connection and starting
Once the machine is positioned, and after having assured that general switch is OFF, the feed cable
may be connected, first directly to side of machine, and subsequently to the mains.

4 - OPERATION AND USE

4.1 - Operation
The machine is positioned on a table in front of the operator. The apparatus is turned on in order to
start heating a frame. Please remember that, after use, the machine must be turned off.
4.2 - Operator
The operator starts up the machine for the necessary time to carry out the operation, subsequently
stopping it.
VAVA
Volt 230
Hz 50
W 1200
A 5
kgs 2
VAVA
mm 160
mm 100
mm 220
ENGLISH Rev. 0/96
VISPA VISPA UP
230
50
450
2
1.8
VISPA VISPA UP
100
260
110
Pag. 5 di 9
230
50
450
2
1.8
100
110
270