Technical Data; Introduction; Safety Regulations - B+BTec DIAMOND3 6560TS Bedienungsanleitung

DIAMOND3

1. TECHNICAL DATA

Type . . . . . . . . . . . . . . . 6560 TS
Capacity . . . . . . . . . . . . . . . . . 5,5 HP
Blade diameter/hole . . . Ø650/25,4 mm
Saw height single cut . . . . . . . . 250 mm
Saw height double cut . . . . . . . . 320 mm
Sawing length . . . . . . . . . . . . . 600 mm
Saw table dimensions . . . 480 x 500 mm
Length . . . . . . . . . . . . . . . 1.560 mm
Width . . . . . . . . . . . . . . . . . 750 mm
Height . . . . . . . . . . . . . . . 1.570 mm
Weight . . . . . . . . . . . . . . . . . .190 kg
Noise level . . . . . . . . . . . . . . 85 dB (A)
Noise level during sawing . . . . 90 dB (A)

2. INTRODUCTION

This sawing machine is designed and
intended for the professional contractor.
The machine is equipped with a height
adjustable saw head. The movable saw-
ing table has 4 ball bearing guide rollers
for precise and easy cutting feed. Through
continuous supply of cooling water the cut-
ting quality is improved and the wear on
the saw blade is minimized. The cooling
water also absorbs the saw dust.
6560TS
®
The quality and construction of this sawing
machine meet the highest standards. The
design is based on longevity and minimal
maintenance.

3. SAFETY REGULATIONS

1 The sawing machine is only to be used
for sawing sandstone, ceramic stone,
concrete products and natural stone.
2 Only saw blades advised by the manu-
facturer should be used.
3 Check the following before starting
sawing:
• the machine should be positioned on a
stable, flat and horizontal base,
• the saw blade must be correctly
mounted, (direction of rotation and
centered correctly)
• the condition of the saw blade,
• correct fixing of the saw cover,
• sufficient supply of clean cooling
water.
4 During sawing the material to be cut
should not be tilted or moved.
5 During sawing with this sawing
machine the max. sound pressure level
is exceeded.
Because the max. sound pressure
level is exceeded during opera-
tion wearing hearing protection
is mandatory.
Sawing of calcium silicate will
expose quartz dust. For your
safety wear respiritor equipment.
6 The safety label on the machine should
never be removed.
7 Besides the above-mentioned safety
regulations the user should pay atten-
tion to the following items:
• Read the instructions for setting up and
using the machine carefully.
• Check that the power cord is correctly
15
GB