5.This Appliance Conforms To The Following - COMED Thermocomed Bedienungsanleitung

This message displays in various cases -please find below a list of the main cases.
Reasons for"LO" or "HI" message display
Temperature reading hampered by
hair, perspiration...
Temperature hampered by an air flux.
The measuring distance is too far.
From high/low temperature condition
to room temperature
1 5.This appliance conforms to the following standards:
●EN 12470-5and ASTM E1965-1 998
●EN 980: Graphical symbols for use in the labeling of medical devices
●EN 1041 :lnformation supplied by the manufacturer with medical d iveces
●EN 60601-1: Medical electrical equipment Part 1: General requirements for safety
(IEC:60601 -1:1998)
●EN 60601-1-2: Medical electrical equipment Part 1-2: General requirements for
safety Collateral standard Electromagnetic compatibility Requirements and test
(IEC 60601-1-2:2001)
EMC Statement
This device has been tested and homologated in accordance with EN60601 -1-2:2007 for EMC.
This does not guarantee in any way that the device will not be affected by electromagnetic interference.
Avoid using the device in high electromagnetic environment.
The MEDICAL DELECTRICAL EQUIPMENT needs special precautions regarding EMC and needs to be
installed and put into service according to the EMC information provided in the ACCOMPANYING
DOCUMENTS.
Shenzhen Calibeur Industries Co.,Ltd
B46 Bldg.Tanglang.Xili.Shenzhen.China
Tel:86-755-26010950
Fax:86-755-26736969
ALTHOME France
Z.A.32390 MONTESTRUC/gers
TEL:00335 62 62 2323
FAX:00335 62 62 21 13
DISTRIBUTED BY:
COMED
PARC DES FORGES 8 RUE LOUISE MICHEL
FR - 67200 STRASBOURG
FRANCE
www.comed.fr
Advice
Make sure that there is no obstruction
prior to taking a tern peratu re.
Make sure there is no air flux as this
could interfere with the infrared system.
Please respect the measuring distance
(between 5 to 8 cm- 2 to 3.2 in).
Waiting for 10 minutes before taking the
body temperature
8