Advice; Maintenance And Cleaning; 4.Troubleshooting - COMED Thermocomed Bedienungsanleitung

11-7.Data Memory
Data memory automatically after temperature measurements, which will display at the right corner
of LCD. Press"UP" or "DOWN" button to display the last temperature measurement.
Under the condition of power off, press "UP" and"DOWN" button together for two seconds, to display
the last temperature measurement. At this mode if change the order number to 0 and press "Backlight"
button, then delete all memory data.
11 -8.Changing The Batteries
Display: when the LCD screen displays " ", the battery is used. Operation: Open the lid and change
the batteries, taking great care with the correct positioning. A mistake with this could cause damage
to the apparatus and compromise the guarantee of your Non-contact Body Infrared Thermometer.
Never use rechargeable batteries. Use only batteries for single usage.
Remove the battery from the instrument if it is not required for extended periods of time in order to
avoid damage to the thermometer resulting from a leaking battery.
11 -9.Longevity Use
The Non-contact Body Infrared Thermometer was conceived for an intense and professional use, its
longevity is guaranteed for 40000 takings.

1 2.Advice

●The protective glass over the lens is the most important and fragile part of the thermometer,
please take great care of it.
●Do not recharge non rechargeable batteries, do not throw in fire.
●Do not expose the thermometer to sunlight or water.

13.Maintenance and Cleaning

●The Infrared Sensor is the most precise part, must be protected carefully.
●Clean the device with a cotton bud lightly moistened with 70% alcohol.
●Do not clean the device with corrosive detergent.
●Keep the device away from water or other liquid.
●Store the device in a dry environment, and keep it away from dust and direct sunlight.
1 4.Trouble shooting
If you happen to have one of the following problems while using your the non-contact forehead IR
thermometer please refer to this breakdown service guide to help resolve the problem. If the problem
persists please contact our customer service.
The screen displays the message"HI"
When using the Non-contact Body
Infrared Body Thermometer the
message HI can show on the screen.
The analysis is above the measurement range
selected, superior to 42.5℃ (108.5℉)
The screen displays the message"LO"
When using the Non-contact Body Infrared Body
Thermometer the message Lo can show on
the screen.
The temperature analyzed is under the
measuring range selected, less than
32℃ (89.6℉)
7