DeWalt DCR006 Betriebsanleitung Seite 62

english
1. Align the battery pack (j) with the rails on the sides of the
battery port (g).
2. Insert the battery pack (j) into the port until it is fully seated.
FUEL GAUGE BATTERY PACKS (FIG. 2)
Some D WALT battery packs include a fuel gauge which consists of
e
three green LED lights that indicate the level of charge remaining in the
battery pack.
To actuate the fuel gauge, press and hold the fuel gauge button (i). A
combination of the three green LED lights will illuminate designating the
level of charge left. When the level of charge in the battery is below the
usable limit, the fuel gauge will not illuminate and the battery will need to
be recharged.
NOTE: The fuel gauge is only an indication of the charge left on the
battery pack. It does not indicate tool functionality and is subject
to variation based on product components, temperature and end-
user application.
OPERATION
Instructions for Use
WARNING: Always observe the safety instructions and
applicable regulations.
WARNING: Do not place the Bluetooth
where it may be exposed to dripping or splashing.
Bluetooth Speaker Functionality (Fig. 1, 3, 4)
®
The speaker operates off of DC power (a battery pack). Audio can be
played through the speaker via a wireless Bluetooth
compatible Bluetooth
phone using a 1/8" (3.5 mm) audio cable to the audio port (f).
POWERING THE SPEAKER ON AND OFF
To turn the Bluetooth
turned on, the LED indicator (b) will indicate the speaker's status.
60
device or by connecting audio device or mobile
®
speaker on, press the power button (a). When
®
speaker in locations
®
connection to a
®