Vigia NM 343 Bedienungsanleitung Seite 9

Manual Mode: If you want to see only one
pressure constantly you may configure it to
manual mode pressing for 3 seconds the
keys or
is configured you will see the pressures 1,
2, 3 (or more) y and the inlet pressure P
pressing the keys
To go back to sequential mode, press the
keys or
Explanation: If there is a pressure loss (tire puncture) the con-
trol panel automatically goes into sequential mode to alert the
driver of the problem.
Air Leak
The panel will indicate the magnitude of the air loss through an alarm:
Small loss: 1 beep every 9 seconds
Medium loss: 2 beeps every 5 seconds
Big loss: 3 beeps every 2 seconds
Important: For every case, repair the air loss and/or contact
the closest oficial service.
If there is more than one air loss the control
panel wil only indicate the sequential
losses.
For example: If there is an air loss in
pressures 2 and 3, the display will indicate
pressure 2 for 10 seconds, then pressure
3 for 10 seconds and so forth, but it will
not indicate pressure 1.
. Once the manual mode
or .
for 3 seconds.
7
USER'S MANUAL
120 120 140 140
100 100 160 160
PSI PSI
9 10 9 10
80 80
8 8
11 11
7 7
6 6 BAR BAR
60 60 5 5
4 4
BAR BAR
PSI PSI
40 40 3 3
BAR BAR
PSI PSI
3 SECONDS
10 SECONDS
140
120
160
100
PSI
9 10
80 8
11
7
BAR
6
60 5
4
BAR
PSI
40 3
BAR
PSI