Vigia NM 343 Bedienungsanleitung Seite 11

Alarm
If you want to deactivate the alarm press
nevertheless if the air pressure
continúes, it will activate automatically
after 20 minutes, being able to deactivate
it again by pressing
Luminous intensity of the Display
If you want to modify the luminous intensity of the display press
which will increase the intensity until it reaches the maximum and
then it will decrease to the minimum so it will increase again and so
forth.
As son as it shows the luminous intensity you want release
Tire Pressure Variances and the Electronic Tire
Calibration System VIGIA
A- Calibrate cool tires.
The tires should be calibrated when they
are cold at ambient temperature according
to the "inflation table" supplied by the tire
manufacturer.
B- Never bleed tires due to the pressure increase generated by operation
(rolling.).
Tires normally increase about 18% its initial pressure. This percentage
may vary according to the type of tires, this is why you should request
the load table to the manufacturer and appropriate pressures.
C- Over-inflation generated by operation (rolling).
VIGIA has the ability to indicate over-inflation when certain conditions
are met:
.
9
USER'S MANUAL
120 140
100 160
PSI
9 10
80
8
11
7
6 BAR
60 5
4
BAR
PSI
40 3
BAR
PSI
.
AMBIENT
TEMPERATURE