Gewiss GW 10 798 Handbuch Seite 27

RF device
channel action
1
short pressure
(combined
input
long pressure
mode)
2
short pressure
(combined
input
long pressure
mode)
contact closes
1 and 2
(status
2
mode)
contact opens
contact closes
1 and 2
(toggle
mode)
contact opens
contact closes
1 and 2
(always
ON mode)
contact opens
contact closes
1 and 2
(always
OFF mode)
contact opens
(2) If the function linked to channels 1 and 2 (status mode) is "alarm sensors", the RF
message is cyclically sent every 10 minutes while the time for the EIB telegram can
be set using ETS.
(3) The ON or OFF value depends on how the sensor alarm status was set (direct or
reverse) in the ETS configuration.
GENERAL DESCRIPTION
2 RF channel input module
Function configured on the receiver EIB channel
alarm
sensors
-
-
-
-
3
ON/OFF
3
ON/OFF
-
-
-
-
-
-
27
E
N
G
L
I
S
H