Troubleshooting Guide - Belle BGN+ Serie Bedienungshandbuch

GB
VIBRATING POKER CONNECTION TO CONVERTER
The poker has a plug to connect the vibrating pokers.
4. Finally remove the converter plug from the electrical supply.
Connection possibilities:
EXTENSION CABLES
DO NOT use damaged or worn out cables.
CAUTION
AVOID heavy loads on the cables.
RECOMMENDATIONS OF USE OF CONCRETE VIBRATOR
Do not use the poker vibrator to spread the concrete.
the best level of bonding between the two layers.
The concrete has been thoroughly vibrated when the surface around the poker
is shiny and no large air bubbles rise to the surface of the concrete. This normally
poker.
70 mm minimum from the walls.
almost out, extract quickly to avoid shaking the surface.
Do not keep the concrete vibrator out of the concrete during long periods. If you have stopped vibrating
CAUTION
the concrete, turn the poker off.
GB
Problem
Operation

Troubleshooting Guide

Cause / Solution
4. Connections in bad conditions
10