Technical Specifications - Audison Prima AP4 D Bedienungsanleitung

USER'S MANUAL
11. TECHNICAL SPECIFICATION
POWER SUPPLY
Voltage:
Idling current:
Switched off:
Consumption @ 14.4 VDC 2Ω Max Musical Power (without CPL):
Remote IN
Fuse
AMPLIFIER STAGE
Distortion - THD @ 1 kHz, 4 Ω, 90% Output Power:
Bandwidth @ -3 dB, 2 V RMS, 4Ω:
S/N ratio @ A weighted, 1,5V, Max Power:
Damping factor @ 1 kHz, 2 VRMS, 4 Ω
Input sensitivity PRE IN:
Input sensitivity SPEAKER IN:
Input impedance:
LOAD IMPEDANCE (MIN):
• 4 Ch: 1-2-3-4
• 2 Ch - Bridge (1-2) (3-4)
OUTPUT POWER (RMS) @ 14.4 VDC, 1% THD:
• 4 Ch @ 4Ω:
• 4 Ch @ 2Ω:
• 2 Ch - (Bridge 1/2; 3/4) @ 4Ω:
OUTPUT POWER (RMS) @ 14.4 VDC, 10% THD:
• 4 Ch @ 4Ω:
• 4 Ch @ 2Ω:
• 2 Ch - (Bridge 1/2; 3/4) @ 4Ω:
CEA SPECIFICATIONS
Output power @ 4Ω, ⩽1% THD+N, 14.4 V:
SN ratio (ref. 1 W output):
SIGNAL CONNECTIONS
PRE IN RCA
SPEAKER IN
MUTE (Energy Saving Control)
GENERAL REQUIREMENTS
Ambient operating temperature range:
SIZE / WEIGHT
Max size (mm/in.):
Weight (kg/lb):
7.5 ÷ 15 VDC
1 A
<0.05 mA
27 A
7 ÷ 15 VDC (1 mA)
30 A
0.1 %
10 ÷ 30k Hz
100 dBA
170
Selectable: 1,5 - 3 - 4,5 V RMS
Selectable: 3 - 6 - 9 V RMS
15k Ω
2Ω
4Ω
70 W x 4
130 W x 4
260 W x 2
90 W x 4
180 W x 4
360 W x 2
70 W x 4
85 dBA
wired
wired from AP4.9 bit / AP5.9 bit
0 °C to 55 °C (32°F to 131°F)
198 x 45,50 x 134 / 7.8 x 1.8 x 5.27
1.33 / 2.93
11
AP4 D /
51