Klarstein Garfield Eco Handbuch Seite 19

INSTALLATION
Reverse Door
Tool required: Philips screwdriver, Flat bladed screwdriver, hexagonal spanner.
• Ensure the unit is unplugged and empty.
• To take the door off, it is necessary to tilt the unit backwards. You should rest the unit
on something solid so that it will not slip during the door removing process.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• It's better that 2 people handle the unit during assembly.
1
Carefully remove the top
hinge cover with a flat
screw driver.
2
Unscrew the top hinge
with a philiphs screw
driver.
3
Remove the hole cover
with a flat screw driver.
EN
19