Manutenzione - OKBABY Eggy Bedienungsanleitung

Manutenzione

1) Pulire il seggiolino, l'imbottitura e le cinture con acqua tiepida
e con un detergente neutro. Non utilizzate solventi o detersivi
corrosivi ed abrasivi. Lasciare asciugare l'imbottitura all'aria.
Non stirare.
2) La riparazione del seggiolino e la sostituzione di componenti
danneggiati deve essere eseguita esclusivamente da personale
autorizzato.
Dati tecnici
Prodotto Seggiolino da bicicletta per bambini OKBABY
mod. Eggy / Eggy Relax
Dimensioni 40x34x80 CM (LxPxH)
Peso 4,4Kg
Accessori optional
• Blocco di fissaggio n. 37490000
Il braccio di supporto non è corredato al blocco di fissaggio.
Diametro tubo piantone da 28 a 40 mm
• Braccio di supporto:
n. 37430000 n. 37430200
telai bici telai bici con
standard inclinazione
posteriore
Conformità e produttore
Prodotto in conformità con la Normativa Europea EN14344.
Produttore:
OKBABY srl, Via del Lavoro 26, 24060 Telgate (BG) Italy.
+39 035 830004 - okbaby@okbaby.it - www.okbaby.it
6 Seggiolino posteriore Eggy / Eggy Relax
n. 37430100 n. 37430700
telai bici con telai bici piccoli
inclinazione per bici da
anteriore donna
Rear mounted child bike seat
EN
OKBABY EGGY / EGGY RELAX
Read the instructions and keep them for future reference.
Follow and comply with the safety precautions!
Make sure you know how to mount and use the Eggy / Eggy Relax
child seat before using it.
Product description
Eggy / Eggy Relax is a rear bike seat that is mounted on the bicycle
frame seat tube with a round section diameter of between 28 and 40
mm.Eggy / Eggy Relax is suitable for use by children with a mini-
mum age of 9 months up to a maximum weight of 22 kg. The child
must be able to sit independently, at least for the duration of the
ride. Eggy / Eggy Relax can also be mounted on pedelecs. It must
not be mounted on any other two-wheeled vehicles such as scoot-
ers, mopeds, motor-cycles, etc.
Product overview
1 Seat
2 Padding
3 Safety belts
4 Footrest with relative strap and adjusting pin
5 Support arm with guide plate
6 Metal U-bolts
7 Fastening block
8 Bag of accessories containing 4 M6x70 screws, 4 washers
and an Allen key
9 Locking pin
10 U-bolt supports
11 Block tightening wrenches
Important safety information
1) The seat must be mounted behind the rider, on the frame seat
tube, as shown in the instructions in this manual. Do not tighten
the screws excessively and check the tightness periodically.
2) Check that the bicycle is suitable for adding supplementary
loads. Check the information supplied with the bicycle or ask for
information and advice from the bicycle manufacturer.
Rear child's seat Eggy / Eggy Relax 7