Important Notice - PRESIDIUM SAM Benutzerhandbuch

IV. IMPORTANT NOTICE
• Due to the testing methodology, this tester is not
intended to test for any colored diamonds, such as
blue and black diamonds, as the electrical conductivity
of these colored diamonds differs from colorless
diamonds.
• Keep the tester dry. Precipitation and all types of
liquids or moisture can contain minerals that will
corrode electronic circuits. If your tester gets wet,
remove the battery, and allow the tester to dry
completely before replacing it.
• Do not use, store or expose the tester in dusty and
dirty areas. Its moving parts and electronic
components can be damaged.
• Do not use, store or expose the tester in hot areas.
High temperatures can damage or shorten the life of
the tester , damage batteries, and warp or melt certain
plastics.
• Do not use, store or expose the tester in cold areas.
When the tester returns to its normal temperature,
moisture can form inside the tester and damage
electronic circuit boards.
• Store the tester at room temperature (23°C – 27°C or
73°F – 80°F).
• Do not attempt to open the tester, including the removal
of the tip, other than as instructed in this handbook.
• Do not drop, knock, or shake the tester. Rough
handling might break internal circuit boards and fine
mechanics.
• Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the tester.
• Do not paint the tester. Paint can clog the moving parts
and prevent proper operation.
If the tester is not working properly, kindly contact
Presidium Customer Service at service@presidium.com.
sg or:
Presidium Instruments Pte Ltd
Unit 7, 207 Henderson Road
Singapore 159550
Attn: Customer Service Executive
7