Fault List - WiseCon WiseBox 3 Bedienungsanleitung

Fault list

Operating fault:
The power supply must be removed from the trap in order to reset the
operating fault.
Wait 5 seconds and then reconnect the power supply to the trap.
Contact your trap supplier if this does not resolve the problem.
Operating fault Types:
GB
Operating fault
Reed switch
Top switch
Overload up
Overload down
Motor time
84
Description
The counter produces no signal
The sensor produces no signal
The motor has stalled on the way up
The motor has stalled on the way down
The motor is too long to run from A to B