Getting Started - WiseCon WiseBox 3 Bedienungsanleitung

Getting started

1. Remove the top plate by using the WiseBox key.
2. Connect a fully-charged battery.
3. Fitting the bin and lid
The following text will now be shown on the trap display
GB
Press to change language, finish by pressing
Now follow the manual from page side 77 to page side 82
The top plate can now be fitted.
Refer to page 9 regarding the correct fitting of the top plate.
When it has been dark for 10 minutes, WiseBox will activate itself
and will be ready to capture.
This delay has been introduced as a safety precaution,
refer to the safety section on page side 63).
Trap is now in operation
76