Atlantis Onepower S series Handbuch Seite 28

 Use a cross-type screwdriver to remove the two top cover screws and slide back
the cover.
 Gently Pull the battery out of the UPS.
 Loosen the black wire from the negative (-, STEP1) terminal and red wire from the
positive (+, STEP2 ) terminal.
 Connect the battery leads to the new battery (small sparks at the battery
connectors are normal during connection).
 Slide the battery into the UPS.
 Close the top cover and fasten two screws then front panel and fasten two screws.
 Dispose of the old battery properly at an appropriate recycling facility.
Once the battery is disconnected, the loads are not
protected from power outages.
Dispose of the old battery properly at an appropriate
recycling facility.
Do not dispose of batteries in a fire. The battery may
explode. Do not open or mutilate the battery or batteries.
Released electrolyte is harmful to the skin and eyes.
When replacing the batteries, use the same number and
type of batteries. Internal battery voltage is 12Vdc.
Sealed, lead-acid, 6-cell battery.
Servicing of batteries should be performed or supervised
by personnel knowledgeable of batteries and the required
precautions. Keep unauthorized personnel away from
batteries.
28
ENG