Care And Maintenance - Tenker U80EH Bedienungsanleitung

Care and maintenance

Care for the main unit and blood pressure monitor cuff
- Keep the unit in the storage case when
no use.
- Clean the unit with soſt dry cloth. Do not
use any abrasive or volatile cleaners.
- Never immerse the unit or any component
in water.
- Make sure the monitor is off prior to cleaning, a mixture of
distilled water and 10 percent bleach could be used.
- Using a spray bottle, moisten a soſt cloth towel with the bleach
or detergent mix until it is fully saturated. Squeeze any excess
moisture from the cloth to avoid any dripping or potential
oversaturation of the cuff.
- Wipe all surfaces of the blood pressure monitor cuff thoroughly,
making sure to clean the inside and outside of the cuff. Be cautious
not to get any moisture in the main unit.
Maintenace
Do not clean the body and cuff with
naphtha, thinner or gasoline etc.
Store the unit in a clean and dry location .
Do not subject the unit to extreme hot or
cold temperature, humidity and direct
sunlight.
* We won't be responsible for any quality problem if you don't care and maintain the product as instructed.
Do not wet the cuff or attempt to clean
the cuff with water.
Remove the batteries if the unit will not be
used in 3 months or longer.
18