Discontinuing A Measurement; Memory-Recall Of Measurements; Read Memory Record - Tenker U80EH Bedienungsanleitung

Proper use of the unit

Discontinuing a measurement

If it is necessary to interrupt a blood pressure measurement for any reason
(eg. the patient feels unwell) the START/STOP button can be pressed at any
time. The device immediately decrease the cuff pressure automatically.

Memory-recall of measurements

This blood pressure monitor automatically stores 2x90 sets measurements
value, the oldest record will be replaced by the latest measurement value
when more than 90 sets each user.

Read memory record

Press the button MEM when power off, the latest 3 times average value
will be shown, press the button MEM again,the last measurement value
will be shown, as well as subsequent measurements can be display one
aſter the other by pressing the button MEM each time.
14