Changing The Internal Light; Reversing The Door Swing - Zerowatt DOUBLE DOOR Bedienungsanleitung

CHANGING THE INTERNAL LIGHT

1. Before carrying out the LED replacement always press and turn the thermostat control to dial
to position 0, then disconnecting the mains supply.
2. Hold and lift up the LED light cover.
3. Remove the old LED by unscrewing it in an anti-clockwise direction.
4. Replace with a new LED light by screwing it in a clockwise direction marking sure that it is
secure in the bulb holder.
Refit the light cover and re-connect your Fridge/Freezer to the mains supply and switch on.
5.

REVERSING THE DOOR SWING

To change the opening direction yourself, please follow these instructions:
Tools required: Philips style screwdriver / flat bladed screwdriver / Hexagonal spanner
1. a. Remove all the cover's screws first.
c. Remove the left hinge cover. Insert the right hinge cover.
2. a. Undo the screws, lift the hinge bracket up and take it off.
b. Remove the bolt with a screwdriver and flip the hinge bracket then reattach the bolt to the
hinge bracket. Remove the fridge door.
b. Lift the top cover away from the Fridge.
40