Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Fig. E
Position the boom towards your mouth. You are now ready to
make or receive calls.
Fig. F
The clothing clip helps to keep the headset free from the weight
of the headset cable. Attach the clip to your clothing at a
comfortable level.
HEADSET ASSEMBLY: OVER-THE-EAR
To identify headset components, please refer to the diagram key
(1-14) on page 7. For assembly instructions, please refer to the
diagrams G-L on page 4.
Fig. G
Attach the pivot ball ring onto the receiver ensuring that the
mounting socket for the earloop is parallel with and touching
the boom.
Fig. H
Depending on which ear the headset is to be worn, insert the
earloop point into the mounting socket of the pivot ball ring from
either the left or right hand side.
Fig. I
Plug the 2.5mm connector into the headset port of the CA40
DECT Adapter.
Fig. J
Slot the headset cable into the earloop cable retainers. Then
position the headset as shown and gently press the receiver
against your ear. Adjust the conformable earloop around your
ear to obtain a comfortable fit.
Fig. K
Position the boom towards your mouth. You are now ready to
make or receive calls.
Fig. L
The clothing clip helps to keep the headset free from the weight
of the headset cable. Attach the clip to your clothing at a
comfortable level.
UK
8
Werbung
