ASROCK FM2A75 Pro4-M Bedienungsanleitung Seite 26

2.7 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT
place jumper caps over these headers and connectors. Plac-
ing jumper caps over the headers and connectors will cause
permanent damage to the motherboard!
Serial ATA3 Connectors
(SATA3_1:
see p.2, No. 16)
(SATA3_2:
see p.2, No. 17)
(SATA3_3:
see p.2, No. 18)
(SATA3_4:
see p.2, No. 15)
(SATA3_5:
see p.2, No. 14)
Serial ATA (SATA)
Data Cable
(Optional)
Print Port Header
(25-pin LPT1)
(see p.2, No. 27)
26
SATA3_5 SATA3_4
SATA3_3 SATA3_2 SATA3_1
ASRock FM2A75 Pro4-M Motherboard
These five Serial ATA3
(SATA3) connectors sup-
port SATA data cables for
internal storage devices.
The current SATA3 interface
allows up to 6.0 Gb/s data
transfer rate.
Either end of the SATA data
cable can be connected to
SATA / SATA2 / SATA3 hard
disks or the SATA2 / SATA3
connectors on this mother-
board.
This is an interface for print
port cables that allows con-
venient connection of printer
devices.