Herunterladen Inhalt Inhalt Diese Seite drucken
ASROCK FM2A75 Pro4-M Bedienungsanleitung
Vorschau ausblenden Andere Handbücher für FM2A75 Pro4-M:

Werbung

Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identification or explanation and to the owners' benefit, without intent to
infringe.
Disclaimer:
Specifications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or fitness for a particular
purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
The terms HDMI™ and HDMI High-Definition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
"Perchlorate Material-special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate"
The terms HDMI™ and HDMI High-Definition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
1

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für ASROCK FM2A75 Pro4-M

  • Seite 1 (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.
  • Seite 2: Motherboard-Layout

    SATA3 Connector (SATA3_5, Grey) PCI Express 2.0 x16 Slot (PCIE3) SATA3 Connector (SATA3_4, Grey) Chassis Intrusion Header (CI1) SATA3 Connector (SATA3_1, Grey) PCI Express 2.0 x1 Slot (PCIE2) SATA3 Connector (SATA3_2, Grey) PCI Express 2.0 x16 Slot (PCIE1) ASRock FM2A75 Pro4-M Motherboard...
  • Seite 3 * There are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications. ACT/LINK SPEED LAN Port LED Indications Activity/Link LED SPEED LED Status Description Status Description No Link 10Mbps connection Blinking Data Activity Orange 100Mbps connection 100Mbps connection Green 1Gbps connection LAN Port ASRock FM2A75 Pro4-M Motherboard...
  • Seite 4 Choose “2CH”, “4CH”, “6CH”, or “8CH” and then you are allowed to select “Realtek HDA Primary output” to use Rear Speaker, Central/Bass, and Front Speaker, or select “Realtek HDA Audio 2nd output” to use front panel audio. *** eSATA3 connector supports SATA Gen3 in cable 1M. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 5: Package Contents

    1. Introduction Thank you for purchasing ASRock FM2A75 Pro4-M motherboard, a reli- able motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance. In this manual, chapter 1 and 2 contains the introduction of the mother- board and step-by-step hardware installation guide.
  • Seite 6: Specifications

    - Supports HDMI 1.4a Technology with max. resolution up to 1920x1200 @ 60Hz - Supports Dual-link DVI with max. resolution up to 2560x1600 @ 75Hz - Supports D-Sub with max. resolution up to 1920x 1600 @ 60Hz ASRock FM2A75 Pro4-M Motherboard...
  • Seite 7 - 5 x SATA3 6.0 Gb/s connectors, support RAID (RAID 0, RAID 1 and RAID 10), NCQ, AHCI and Hot Plug USB 3.0 - 2 x Rear USB 3.0 ports, support USB 1.1/2.0/3.0 up to 5Gb/s ASRock FM2A75 Pro4-M Motherboard...
  • Seite 8: Hardware Monitor

    - SMBIOS 2.3.1 Support - DRAM, VDDP, VDDR, SB Voltage Multi-adjustment Support CD - Drivers, Utilities, AntiVirus Software (Trial Version), AMD Live! Explorer, AMD Fusion, CyberLink MediaEspresso 6.5 Trial, ASRock MAGIX Multimedia Suite - OEM Hardware - CPU Temperature Sensing Monitor...
  • Seite 9 Overclocking may affect your system’s stability, or even cause damage to the compo- nents and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by overclocking. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 10 ® tem usage under Windows 7 / Vista . For Windows 64-bit OS with 64-bit CPU, there is no such limitation. You can use ASRock XFast RAM to utilize the memory ® that Windows cannot use. 3. xvYCC and Deep Color are only supported under Win- ®...
  • Seite 11: Unique Features

    Windows OS 32-bit CPU. ASRock Instant Boot ASRock Instant Boot allows you to turn on your PC in just a few seconds, provides a much more efficient way to save energy, time, money, and improves system run- ning speed for your system.
  • Seite 12 If you desire a faster, less restricted way of charging your Apple devices, such as iPhone/iPad/iPod Touch, ASRock has prepared a wonderful solution for you - ASRock APP Charger. Simply install the APP Charger driver, it makes your iPhone charge much quickly from your computer and up to 40% faster than before.
  • Seite 13 ASRock XFast RAM ASRock XFast RAM is a new function that is included into ASRock Extreme Tuning Utility (AXTU). It fully uti- lizes the memory space that cannot be used under Win- ®...
  • Seite 14 ASRock UEFI System Browser ASRock UEFI system browser is a useful tool included in graphical UEFI. It can detect the devices and configura- tions that users are currently using in their PC. With the UEFI system browser, you can easily examine the cur- rent system configuration in UEFI setup.
  • Seite 15 UEFI provides a more attractive interface and brings a lot more amusement. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 16 Whenever you uninstall any components, place them on a grounded anti-static pad or in the bag that comes with the components. When placing screws to secure the motherboard to the chassis, please do not over-tighten the screws! Doing so may damage the motherboard. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 17: Cpu Installation

    Then connect the CPU fan to the CPU FAN connector (CPU_FAN1, see Page 2, No. 5 or CPU_FAN2, see Page 2, No. 6). For proper installation, please kindly refer to the instruction manual of the CPU fan and the heatsink. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 18 DDR3_A1 and DDR3_A2, it is unable to acti- vate Dual Channel Memory Technology. 4. It is not allowed to install a DDR or DDR2 memory module into a DDR3 slot; otherwise, this motherboard and DIMM may be damaged. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 19: Installing A Dimm

    DIMM if you force the DIMM into the slot at incorrect orientation. Step 3. Firmly insert the DIMM into the slot until the retaining clips at both ends fully snap back in place and the DIMM is properly seated. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 20: Installing An Expansion Card

    Step 4. Align the card connector with the slot and press firmly until the card is completely seated on the slot. Step 5. Fasten the card to the chassis with screws. Step 6. Replace the system cover. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 21 AMD graphics card manuals for detailed installation guide. Step 1. Insert one Radeon graphics card into PCIE1 slot and the other Radeon graphics card to PCIE3 slot. Make sure that the cards are properly seated on the slots. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 22 Step 3. Connect the DVI monitor cable to the DVI connector on the Rad- eon graphics card on PCIE1 slot. (You may use the DVI to D-Sub adapter to convert the DVI connector to D-Sub interface, and then connect the D-Sub monitor cable to the DVI to D-Sub adapter.) ASRock FM2A75 Pro4-M Motherboard...
  • Seite 23 AMD Catalyst Control Center Step 6. Double-click “AMD Catalyst Control Center”. Click “View”, select “CrossFireX ”, and then check the item “Enable CrossFireX ”. Select “2 GPUs” and click “Apply” (if you install two Radeon graphics cards). ASRock FM2A75 Pro4-M Motherboard...
  • Seite 24 AMD Technologies Inc., and is used only for identification or explanation and to the owners’ benefit, without intent to infringe. * For further information of AMD CrossFireX technology, please check AMD’s website for updates and details. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 25 Please be noted that the password, date, time, user default profile, 1394 GUID and MAC address will be cleared only if the CMOS battery is removed. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 26 SATA2 / SATA3 connectors on this mother- board. Print Port Header This is an interface for print (25-pin LPT1) port cables that allows con- (see p.2, No. 27) venient connection of printer devices. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 27 This header can be used IRTX t o c o n n e c t t h e r e m o t e Module Header IRRX ATX+5VSB controller receiver. (4-pin CIR1) (see p.2, No. 25) ASRock FM2A75 Pro4-M Motherboard...
  • Seite 28 (see p.2, No. 21) functions. Connect the power switch, reset switch and system status indica- tor on the chassis to this header according to the pin assignments below. Note the positive and negative pins before connecting the cables. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 29 (see p.2, No. 20) to indicate system power status. The LED is on when the system is operating. The LED keeps blinking in S1 state. The LED is off in S3/ S4 state or S5 state (power off). ASRock FM2A75 Pro4-M Motherboard...
  • Seite 30 20-pin ATX power supply. To use a 20- pin ATX power supply, please plug your power supply along Pin 1 and Pin 13. 20-Pin ATX Power Supply Installation ASRock FM2A75 Pro4-M Motherboard...
  • Seite 31 C A S E O P E N d e t e c t i o n (see p.2, No. 33) which detects whether the chassis cover has been re- moved. This feature requires a chassis with chassis intru- sion detection design. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 32 STEP 1: Set Up UEFI. A. Enter UEFI SETUP UTILITY Advanced screen Storage Configuration. B. Set the option “SATA Mode” to [AHCI]. ® STEP 2: Install Windows 7 / 7 64-bit / Vista / Vista 64-bit OS on your system. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 33 STEP 1: Set Up UEFI. A. Enter UEFI SETUP UTILITY Advanced screen Storage Configuration. B. Set the option “SATA Mode” to [IDE]. ® STEP 2: Install Windows 7 / 7 64-bit / Vista / Vista 64-bit OS on your system. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 34 CD into your CD-ROM drive. It will display the Main Menu automatically if “AUTORUN” is enabled in your computer. If the Main Menu does not ap- pear automatically, locate and double-click the file “ASRSETUP.EXE” in the Support CD to display the menu. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 35 1. Einführung Wir danken Ihnen für den Kauf des ASRock FM2A75 Pro4-M Motherboard, ein zu- verlässiges Produkt, welches unter den ständigen, strengen Qualitätskontrollen von ASRock gefertigt wurde. Es bietet Ihnen exzellente Leistung und robustes Design, gemäß der Verpflichtung von ASRock zu Qualität und Halbarkeit. Diese Schnel- linstallationsanleitung führt in das Motherboard und die schrittweise Installation...
  • Seite 36: Spezifikationen

    - Unterstützt stereoskopisches 3D per Blu-ray mit HDMI 1.4a - Unterstützt AMD Steady Video : Neuartige Funktion der Videonachbearbeitung für automatische Reduzierung von Bildschwankungen bei Heim-/Online-Videos - Unterstützt HDCP mit DVI- und HDMI-Ports - Unterstutzt 1080p Blu-ray (BD) / HD-DVD-Wiedergabe mit DVI- und HDMI-Ports ASRock FM2A75 Pro4-M Motherboard...
  • Seite 37 - 1 x Betriebs-LED-Header - 1 x Verteiler für Gehäuse Eindringversuche - 2 x CPUlüfter-Anschluss (1 x 4-pin, 1 x 3-pin) - 1 x Gehäuselüfter-Anschluss (4-pin) - 1 x Stromlüfter-Anschluss (3-pin) - 24-pin ATX-Netz-Header - 8-pin anschluss für 12V-ATX-Netzteil ASRock FM2A75 Pro4-M Motherboard...
  • Seite 38 - SMBIOS 2.3.1 - DRAM, VDDP, VDDR, SB Stromspannung Multianpassung Support-CD - Treiber, Dienstprogramme, Antivirussoftware (Probeversion), AMD Live! Explorer, AMD Fusion-Dienstprogramm, Cyber Link MediaEspresso 6.5-Testversion, ASRock MAGIX- Multimedia-Suite - OEM Hardware Monitor - CPU-Temperatursensor - Motherboardtemperaturerkennung - Drehzahlmessung für CPU/Gehäuse/Stromlüfter - Geräuscharmer CPU-/Gehäuselüfter...
  • Seite 39: Einstellung Der Jumper

    Sie zuerst das System hoch. Fahren Sie es dann vor der CMOS-Löschung herunter. Bitte beachten Sie, dass Kennwort, Datum, Uhrzeit, benutzerdefiniertes Profil, 1394 GUID und MAC-Adresse nur gelöscht werden, wenn die CMOS-Batterie entfernt wird. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 40 SATA3 Festplatte oder das (Option) SATA3 Verbindungsstück auf dieser Hauptplatine angeschlossen werden. Druckerport-Anschlussleiste Dies ist eine Schnittstelle zum Anschluss eines Druckerport- (25-pol. LPT1) Kabels, mit dem Sie passende (siehe S.2 - No. 27) Drucker auf einfache Weise anschließen können. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 41 Infrarot-Modul-Header Dieser Header unterstützt ein optionales, drahtloses Sende- (5-pin IR1) und Empfangs-Infrarotmodul. (siehe S.2 - No. 29) Consumer Infrared-Modul-Header Dieser Header kann zum Anschließen Remote- (4-pin CIR1) IRTX IRRX Empfänger. (siehe S.2 - No. 25) ATX+5VSB ASRock FM2A75 Pro4-M Motherboard...
  • Seite 42 Hinweise zur Pinbelegung. Beachten Sie die positiven und negativen Pins, bevor Sie die Kabel anschließen. PWRBTN (Ein-/Ausschalter): Zum Anschließen des Ein-/Ausschalters an der Frontblende des Gehäu ses. Sie können konfigurieren, wie das System mit Hilfe des Ein-/Ausschalters ausgeschaltet werden können soll. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 43 (3-pin PLED1) des Systembetriebsstatus an (siehe S.2 - No. 20) diesem Header an. Die LED leuchtet, wenn das System in Betrieb ist. Die LED blinkt im S1/S3-Zustand. Im S4- oder S5-Zustand (ausgeschaltet) leuchtet die LED nicht. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 44 Pins 1 – 3. Pins 1–3 anschließen Lüfter mit dreipoligem Anschluss installieren FAN_SPEED (3-pin CPU_FAN2) +12V (sieche S.2 - No. 6) ATX-Netz-Header Verbinden Sie die ATX- Stromversorgung mit diesem (24-pin ATXPWR1) Header. (siehe S.2 - No. 9) ASRock FM2A75 Pro4-M Motherboard...
  • Seite 45 Verteiler für Gehäuseeindringversuche Dieses Motherboard unterstützt eine Gehäuse-Offen- (2-pin CI1) Erkennnungsfunktion, die (siehe S.2 - No. 33) feststellt, ob die Gehäuseabdeckung entfernt wurde. Diese Funktion erfordert ein Gehäuse, das mit einem Design zur Erkennung von Gehäuseeindringversuchen ausgestattet ist. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 46 ASRSETUP.EXE im der Support-CD, um die Menüs aufzurufen. Das Setup-Programm soll es Ihnen so leicht wie möglich machen. Es ist menüges- teuert, d.h. Sie können in den verschiedenen Untermenüs Ihre Auswahl treffen und die Programme werden dann automatisch installiert. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 47: Contenu Du Paquet

    1. Introduction Merci pour votre achat d’une carte mère ASRock FM2A75 Pro4-M, une carte mère très fiable produite selon les critères de qualité rigoureux de ASRock. Elle offre des performances excellentes et une conception robuste conformément à l’engagement d’ASRock sur la qualité et la fiabilité au long terme.
  • Seite 48: Spécifications

    1920x1600 @ 60Hz - Prend en charge Lip Sync, Deep Color (12bpc), xvYCC et HBR (High Bit Rate Audio: Audio à haut débit binaire) avec HDMI - Prend en charge la 3D stéréoscopique Blu-ray avec HDMI 1.4a ASRock FM2A75 Pro4-M Motherboard...
  • Seite 49 6.0Go/s - 1 x En-tête du module infrarouge - 1 x Barrette pour module à infrarouges grand public - 1 x embase de port d’impression - 1 x En-tête de port COM ASRock FM2A75 Pro4-M Motherboard...
  • Seite 50 - DRAM, VDDP, VDDR, SB Tension Multi-ajustement CD d’assistance - Pilotes, utilitaires, logiciel anti-virus (Version d’essai), AMD Live! Explorer, AMD Fusion, CyberLink MediaEspresso 6.5 Trial, Suite multimédia ASRock MAGIX - OEM Surveillance - Détection de la température de l’UC système - Mesure de température de la carte mère...
  • Seite 51 CMOS. Veuillez noter que le mot de passe, la date, l’heure, le profil par défaut de l’utilisateur, 1394 GUID et l’adresse MAC seront effacés seulement si la batterie du CMOS est enlevée. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 52 E/S, (USB5_6 br. 9) DUMMY il y a trois embases USB 2.0 (voir p.2 No. 22) sur cette carte mère. Chaque embase USB 2.0 peut prendre USB_PWR en charge 2 ports USB 2.0. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 53 (voir p.2 No. 25) IRTX IRRX ATX+5VSB Connecteur audio panneau C’est une interface pour un câble avant audio en façade qui (HD_AUDIO1 br. 9) permet le branchement et le (voir p.2 No. 30) contrôle commodes de périphériques audio. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 54 RESET (Interrupteur de réinitialisation): Connectez ici le connecteur de réinitialisation sur le panneau avant du châssis. Appuyez sur l’interrupteur de réinitialisation pour redémarrer l’ordinateur s’il se bloque ou s’il n’arrive pas à redémarrer normalement. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 55 Connecteur pour châssis et ventilateur Branchez les câbles du ventilateur aux connecteurs (CHA_FAN1 br. 4) pour ventilateur et faites (voir p.2 No. 12) correspondre le fil noir à la broche de terre. (PWR_FAN1 br. 3) (voir p.2 No. 1) ASRock FM2A75 Pro4-M Motherboard...
  • Seite 56 Pour utiliser une alimentation ATX 20 broches, branchez à l’alimentation électrique ainsi qu’aux broches 1 et 13. 20-Installation de l’alimentation électrique ATX Connecteur ATX 12V Veuillez connecter une unité d’alimentation électrique ATX (ATX12V1 br.8) 12V sur ce connecteur. (voir p.2 No. 2) ASRock FM2A75 Pro4-M Motherboard...
  • Seite 57 Cette carte-mère prend en charge la détection (CI1 br.2) d’OUVERTURE DE BOÎTIER, (voir p.2 No. 33) quidétecte tout retrait du capot duchâssis. Cette fonction- nécessite un châssis qui a été- conçu pour la détectiond’intrusion dans le châssis. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 58 Pour utiliser le CD technique, insérez-le dans le lecteur de CD-ROM. Le Menu principal s’affiche automatiquement si “AUTORUN” est activé dans votre ordinateur. Si le Menu principal n’apparaît pas automatiquement, localisez dans le CD technique le fichier “ASRSETUP.EXE” et double-cliquez dessus pour afficher les menus. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 59: Contenuto Della Confezione

    1. Introduzione Grazie per aver scelto una scheda madre ASRock FM2A75 Pro4-M, una scheda madre affidabile prodotta secondo i severi criteri di qualità ASRock. Le prestazioni eccellenti e il design robusto si conformano all’impegno di ASRock nella ricerca della qualità e della resistenza.
  • Seite 60 - Supporto della HDCP con le porte DVI e HDMI - Supporto 1080p Blu-ray (BD) / HD-DVD riproduzione con le porte DVI e HDMI ASRock FM2A75 Pro4-M Motherboard...
  • Seite 61 - 1 x header di intrusione dello chassis - 2 x connettore CPU ventola (1 x 4-pin, 1 x 3-pin) - 1 x connettore Chassis ventola (4-pin) - 1 x connettore Alimentazione ventola (3-pin) - 24-pin collettore alimentazione ATX ASRock FM2A75 Pro4-M Motherboard...
  • Seite 62 7 / 7 64 bit / Vista / Vista 64 bit Certificazioni - FCC, CE, WHQL - Predisposto ErP/EuP (è necessaria l’alimentazione predis posta per il sistema ErP/EuP) * Per ulteriori informazioni, prego visitare il nostro sito internet: http://www.asrock.com ASRock FM2A75 Pro4-M Motherboard...
  • Seite 63 è completato l’aggiornamento del BIOS, è necessario per prima cosa avviare il sistema e poi spegnerlo prima di eseguire l’azzeramento della CMOS. Notare che password, data, ore, profilo utente predefinito, 1394 GUID e indirizzo MAC saranno cancellati solo se è rimossa la batteria della CMOS. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 64 Oltre alle quattro porte USB 2.0 predefinite nel pannello I/O, la (9-pin USB5_6) DUMMY scheda madre dispone di tre (vedi p.2 Nr. 22) intestazioni USB 2.0. Ciascuna intestazione USB 2.0 supporta USB_PWR due porte USB 2.0. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 65 IRTX (vedi p.2 Nr. 25) IRRX ATX+5VSB Connettore audio sul È un’interfaccia per il cavo del pannello frontale pannello audio. Che consente connessione facile e controllo (9-pin HD_AUDIO1) dei dispositivi audio. (vedi p.2 Nr. 30) ASRock FM2A75 Pro4-M Motherboard...
  • Seite 66 RESET (interruttore di ripristino): Va collegato all’interruttore di ripristino del pannello frontale del telaio. Premere l’interruttore di ripristino per riavviare il sistema se il computer si blocca e non riesce ad eseguire un normale riavvio. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 67 LED è spento in stato S4 o S5 (spegnimento). Collettori Chassis ed alimentazione ventola Collegare i cavi della ventola ai corrispondenti connettori (4-pin CHA_FAN1) facendo combaciare il cavo (vedi p.2 Nr. 12) nero col pin di terra. (3-pin PWR_FAN1) (vedi p.2 Nr. 1 ASRock FM2A75 Pro4-M Motherboard...
  • Seite 68 ATX a 20 pin, collegare l’alimentatore con il Pin 1 e il Pin 13. Installazione dell’alimentatore ATX a 20 pin Connettore ATX 12 V Collegare un alimentatore ATX 12 V a questo connettore. (8-pin ATX12V1) (vedi p.2 Nr. 2) ASRock FM2A75 Pro4-M Motherboard...
  • Seite 69 Header di intrusione dello chassis Questa scheda madre supporta la funzione di rilevamento del (2-pin CI1) CASE APERTOche rileva che (vedi p.2 Nr. 33) il coperchio dellochassis è stato rimosso.Questa funzione richiede unochassis con struttura dirilevamento di intrusione dellochassis. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 70 Inserire il CD di supporto nel lettore CD-ROM. Se la funzione “AUTORUN” è attivata nel computer, apparirà automaticamente il Menù principale. Se il Menù principale non appare automaticamente, posizionarsi sul file “ASRSETUP.EXE” del CD di sup- porto e cliccare due volte per visualizzare i menù. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 71: Contenido De La Caja

    1. Introducción Gracias por su compra de ASRock FM2A75 Pro4-M placa madre, una placa de confianza producida bajo el control de calidad estricto y persistente. La placa madre provee realización excelente con un diseño robusto conforme al compromiso de calidad y resistencia de ASRock.
  • Seite 72 : Nueva capacidad de pospro cesamiento de vídeo para reducción automática de oscila ciones en vídeo doméstico y en línea - Admite la HDCP con puertos DVI y HDMI - Apoya la reproducción de Blu-rayo de 1080p (BD) / HD-DVD ASRock FM2A75 Pro4-M Motherboard...
  • Seite 73 - 1 x En-tête de port COM - 1 x Conector de detección de intrusión en el chasis - 2 x Conector de ventilador de CPU (1 x 4-pin, 1 x 3-pin) - 1 x Conector de ventilador de chasis (4-pin) ASRock FM2A75 Pro4-M Motherboard...
  • Seite 74 - Múltiple ajuste de DRAM, VDDP, VDDR, SB Voltage CD de soport - Controladores, Utilerías, Software de Anti Virus (Versión de prueba), AMD Live! Explorer, AMD Fusion, Prueba de CyberLink MediaEspresso 6.5, conjunto multimedia ASRock MAGIX - OEM Monitor - Sensibilidad a la temperatura del procesador...
  • Seite 75 Tenga en cuenta que la contraseña, la fecha, la hora, el perfil predeterminado del usuario, el GUID 1394 y la dirección MAC solamente se borrará si la batería CMOS se quita. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 76 2.0 predeterminados en el (9-pin USB5_6) DUMMY panel de E/S, hay tres bases de (vea p.2, N. 22) conexiones USB 2.0 en esta placa base. Cada una de estas USB_PWR bases de conexiones admite dos puertos USB 2.0. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 77 (vea p.2, N. 25) Conector de audio de Este es una interface para panel frontal cable de audio de panel frontal que permite conexión y control (9-pin HD_AUDIO1) conveniente de apparatos de (vea p.2, N. 30) Audio. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 78 RESTABLECER (interruptor de restablecimiento): Conecte el interruptor de restablecimiento situado en el panel frontal del chasis. Pulse el interruptor de restablecimiento para restablecer el equipo si se bloquea y no se reinicia con normalidad. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 79 (vea p.2, N. 20) sistema. El indicador LED se encenderá si el sistema se encuentra en funcionamiento. El indicador LED parpadeará en el estado S1/S3. El indicador LED se apagará en los estados S4 o S5 (apagado). ASRock FM2A75 Pro4-M Motherboard...
  • Seite 80 20 pins tradicional. Para usar una fuente de alimentación ATX de 20 pins, por favor, conecte su fuente de alimentación usando los Pins 1 y 13. Instalación de una Fuente de Alimentación ATX de 20 Pins ASRock FM2A75 Pro4-M Motherboard...
  • Seite 81 APERTURA DE CARCASA, (2-pin CI1) quepermite detectar si se (vea p.2, N. 33) haretirado la cubierta del chasis.Dicha función requiere unchasis con diseño específicopara la detección de intrusiónen el chasis. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 82 CD en el lector de CD y se desplegará el Menú Prin- cipal automáticamente si «AUTORUN» está habilitado en su computadora. Si el Menú Principal no aparece automáticamente, localice y doble-pulse en el ar- chivo “ASRSETUP.EXE” para iniciar la instalación. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 83 1. Введение Благодарим вас за покупку материнской платы ASRock FM2A75 Pro4-M надежной материнской платы, изготовленной в соответствии с постоянно предъявляемыми ASRock жесткими требованиями к качеству. Она обеспечивает превосходную производительность и отличается отличной конструкцией, которые отражают приверженность ASRock качеству и долговечности.
  • Seite 84 воспроизведение HD-DVD через разъемы DVI и HDMI Аудиосистема - 7.1 CH HD Аудио HD с Довольной Защитой (Кодер-декодер Аудио Realtek ALC892) - Поддержка Premium Blu-ray audio - Поддержка технологии THX TruStudio ЛВС - PCIE x 1 Gigabit LAN 10/100/1000 Mb/s ASRock FM2A75 Pro4-M Motherboard...
  • Seite 85 - 1 x Колодка USB 3.0 (одна колодка для поддержки 2 дополнительных портов USB 3.0) BIOS - 64Mb AMI UEFI Legal BIOS с поддержкой rpaфичеckoro интеpфeйca поль зователя - поддержка “Plug and Play” - ACPI 1.1, включение по событиям ASRock FM2A75 Pro4-M Motherboard...
  • Seite 86 - Регулировка напряжений DRAM, VDDP, VDDR, SB Компакт диск - Драйверы, Утилиты, Антивирус (пробная версия), AMD Live! поддержки Explorer, AMD Fusion, Пробная версия программы CyberLink MediaEspresso 6.5, ASRock MAGIX Multimedia Suite - поставщик Контроль - Датчики температуры процессора оборудо- - Датчики температуры корпуса...
  • Seite 87 перед очисткой CMOS, необходимо сначала выполнить загрузку системы, а затем завершить ее работу. Примите во внимание, что пароль, дата, время, профиль пользователя по умолчанию, идентификатор 1394 GUID и MAC-адрес будут очищены только тогда, когда будет извлечена из своего гнезда батарейка CMOS. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 88 Помимо четыре стандартных USB_PWR портов USB 2.0 на панели ввода- (9-контактный USB5_6) DUMMY вывода,на данной материнской (см. стр. 2, п. 22) плате предусмотрено три разъема USB 2.0. Каждый разъем USB 2.0 поддерживает два порта USB 2.0. USB_PWR ASRock FM2A75 Pro4-M Motherboard...
  • Seite 89 (4-контактный CIR1) приемник. (см. стр. 2, п. 25) IRTX IRRX ATX+5VSB Аудиоразъем передней Этот интерфейс предназначен панели для присоединения аудиокабеля передней панели, (9-контактный HD_AUDIO1) обеспечивающего удобное (см. cтр. 2, п. 30) подключение аудиоустройств и управление ими. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 90 указанным ниже назначением контактов. При подключении кабелей необходимо соблюдать полярность положительных и отрицательных контактов. PWRBTN (кнопка питания): Подключите к этим контактам кнопку питания на передней панели корпуса. Способ выключения системы с помощью кнопки питания можно настроить. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 91 Подключите индикатор Power LED к этому разъему для отображения (3-контактный PLED1) статуса питания системы. Этот (см. стр. 2, п. 20) светодиод продолжит мигать в режиме S1/S3. Светодиод будет выключен в режимах S4 или S5 (система выключена). ASRock FM2A75 Pro4-M Motherboard...
  • Seite 92 материнской плате, для этого следует использовать контакты 1-3. Контакты 1-3 подключены Установка вентилятора с 3-контактным разъемом (3-контактный CPU_FAN2) FAN_SPEED +12V (см. стр. 2, п. 6) Колодка питания ATX Подключите к этой колодке кабель питания ATX. (24-контактный ATXPWR1) (см. стр. 2, п. 9) ASRock FM2A75 Pro4-M Motherboard...
  • Seite 93 (см. стр. 2, п. 28) Датчик открытой крышки Эта материнская плата поддерживает функцию (2-контактный CI1) определения открытой крышки, (см. стр. 2, п. 33) которая позволяет определить, была ли снята крышка корпуса. Функция требует поддержку со стороны корпуса. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 94 Если в вашем компьютере включена функция автозапуска (AUTORUN), то на экране автоматически появится главное меню компакт-диска (Main Menu). Если этого не произошло, найдите в на компакт-диске поддержки файл ASRSETUP.EXE и дважды щелкните на нем, чтобы открыть меню. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 95 önceden haber verilmeksizin değişebilir. Bu belgede değişiklik yapılması durumunda, güncelleştirilmiş sürüm ayrıca haber verilmeksizin ASRock web sitesinde sunulur. En son VGA kartlarını ve CPU destek listelerini de ASRock web sitesinde bulabilirsiniz. ASRock web sitesi http://www.asrock.com Bu anakartla ilgili teknik desteğe ihtiyacınız olursa, kullandığınız modele özel bilgiler için lütfen web sitemizi ziyaret edin.
  • Seite 96 - AMD Steady Video ’yu destekler: Ev/çevrimiçi videoda otomatik titreşim azaltma için yeni video işleme sonrası özelliği - DVI ve HDMI portlarэyla HDCP iюlevini destekler - DVI ve HDMI portlarэyla Tam HD 1080p Blu-ray (BD) / HD-DVD oynatэmэnэ destekler ASRock FM2A75 Pro4-M Motherboard...
  • Seite 97 - 2 x CPU FAN konektörü (1 x 4 pin, 1 x 3 pin) - 1 x Kasa FAN konektörü (4 pin) - 1 x Gьз FAN konektörü (3 pin) - 24 pin ATX güç konektörü - 8 pin 12V güç konektörü ASRock FM2A75 Pro4-M Motherboard...
  • Seite 98 - Microsoft Windows 7 / 7 64-bit / Vista / Vista 64-bit uyumlu Sertifikalar - FCC, CE, WHQL - ErP/EuP Hazır (ErP/EuP hazır güç kaynağı gerekli) * Ayrıntılı ürün bilgileri için lütfen web sitemizi ziyaret edin: http://www.asrock.com ASRock FM2A75 Pro4-M Motherboard...
  • Seite 99 BIOS’u güncellemeyi tamamladığınızda CMOS’u temizlemeniz gerekirse, ilk olarak sistemi başlatmanız ve ardından CMOS temizleme işlemini gerçekleştirmeden önce kapatmanız gereklidir. Parola, tarih, saat, kullanıcı varsayılan profili, 1394 GUID ve MAC adresinin yalnızca CMOS pili çıkarıldığında temizleneceğini lütfen aklınızda bulundurunuz. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 100 USB 2.0 portundan başka, bu (9-pinli USB5_6) DUMMY anakartta üç USB 2.0 fişi (bkz. s.2 No. 22) bulunur. Her USB 2.0 fişi iki USB 2.0 portunu destekler. USB_PWR (9-pinli USB7_8) USB_PWR (bkz. s.2 No. 24) DUMMY USB_PWR ASRock FM2A75 Pro4-M Motherboard...
  • Seite 101 (4-pinli CIR1) (bkz. s.2 No. 25) IRTX IRRX ATX+5VSB Ön Panel Ses Fişi Bu, panel ses kablosu için uygun bağlantı sağlayan ve (9-pinli HD_AUDIO1) ses cihazlarını kontrol etmeyi (bkz. s.2 No. 30) sağlayan bir arayüzdür. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 102 çalışırken LED yanar. Sistem S1/S3 uyku modunda iken LED yanıp sön meye devam eder. Sistem S4 uyku modunda veya kapalı (S5) iken LED söner. HDLED (Sabit Disk Çalışma LED’i): Kasa üzerindeki sabit disk çalışma LED’ini ön panele bağlayın. Sabit disk veri okurken veya yazarken LED yanar. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 103 (bkz. s.2 No. 12) bağlayın. (3-pinli PWR_FAN1) (bkz. s.2 No. 1) CPU Fan Konektörü Lütfen fan kablolarını CPU FAN_SPEED_CONTROL FAN_SPEED fanına bu konektöre bağlayın ve +12V 4-pinli CPU_FAN1) siyah kabloyu toprak pinine (bkz. s.2 No. 5) bağlayın. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 104 Bu anakart 8-pinli ATX 12V güç konektörü sağlasa da geleneksel bir 4-pinli ATX 12V güç kaynağı bağlarsanız da çalışabilir. 4-pinli ATX güç kaynağını kullanmak için, lütfen güç kaynağınızı Pin 1 ve Pin 5'le birlikte takın. 4-Pinli ATX 12V Güç Kaynağını Takma ASRock FM2A75 Pro4-M Motherboard...
  • Seite 105 (bkz. s.2 No. 28) Kasaya Yetkisiz Erişim Fişi Bu anakart, kasa kapağının çıkarılıp çıkarılmadığını (2-pinli CI1) algılayan KASA AÇIK algılama (bkz. s.2 No. 33) özelliğini destekler. Bu özellik, kasaya yetkisiz erişim tasarımına sahip bir kasa gerektirir. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 106 Destek CD'sini kullanmaya başlamak için, CD'yi CDROM sürücünüze takın. Bilgisayarınızda "OTOMATİK KULLAN" özelliği etkinleştirilmişse, Ana Menüyü otomatik olarak görüntüler. Ana Menü otomatik olarak görüntülenmezse, menüleri görüntülemek için Destek CD'sinin "ASRSETUP.EXE" dosyasını bulun ve çift tıklatın. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 107 1. 제품소개 ASRock 의 FM2A75 Pro4-M 메인 보드를 구매하여 주신것에 대하여 감사 드립니다 . 이 메인보드는 엄격한 품질관리 하에 생산되어진 신뢰성 있는 메인보드 입니다 . 이 제품은 고 품격 디자인과 함께 ASRock 의 우수한 품질과 최고의 안정성을 자랑하고 있습니다 . 이 빠른 설치 안내서에는 마더보드에 대한 설명과 단계별 설치 방법이 실...
  • Seite 108 - DVI 및 HDMI 포트를 이용한 1080p Blu-ray (BD) / HD-DVD 재생을 지원 오디오 - 7.1 CH HD Audio 목록 보호 (Realtek ALC892 Audio Codec) - Premium Blu-ray 오디오 지원 - THX TruStudio 지원 랜 - PCIE x1 Gigabit LAN 10/100/1000 Mb/s - Realtek RTL8111E ASRock FM2A75 Pro4-M Motherboard...
  • Seite 109 - USB 2.0 헤더 3 개 (6 개의 추가 USB 2.0 포트를 지원하는 헤더 2 개 ) - USB 3.0 헤더 1 개 (2 개의 추가 USB 3.0 포트를 지원하는헤더 2 개 ) BIOS - 64Mb GUI 지원을 제공하는 AMI UEFI 적합형 BIOS ASRock FM2A75 Pro4-M Motherboard...
  • Seite 110 ® - 마이크로 소프트 Windows 7/7 64 비트 /Vista /Vista 비트 비트 와 호환 인증서 - FCC, CE, WHQL - ErP/EuP 지원 (ErP/EuP 지원 전원 공급기가 요구됨 ) * 상세한 제품정보는 당사의 웹사이트를 방문할수있습니다 . http://www.asrock.com ASRock FM2A75 Pro4-M Motherboard...
  • Seite 111 삭제해야 하는 경우 먼저 시스템을 부팅하고 CMOS 를 종료하고 삭제 작업을 해 야 합니다 . CMOS 배터리를 제거할 경우에만 암호 , 날짜 , 시간 , 사용자 기본 프 로파일 , 1394 GUID, MAC 주소가 삭제됩니다 . ASRock FM2A75 Pro4-M Motherboard...
  • Seite 112 혹은 SATA2 / SATA3 커넥터 에 연결합니다 . 프린트 포트 헤더 이것은 프린터 장치를 편리하게 연결할 수 있도록 해주는 프린트 (25 핀 LPT1) 포트 케이블용 인터페이스입니 (2 페이지 , 27 번 항목 참조 ) 다 . ASRock FM2A75 Pro4-M Motherboard...
  • Seite 113 (2 페이지 , 29 번 항목 참조 ) 소비자용 적외선 모듈 헤더 이 헤더는 리모콘 수신기 연결하 는 데 사용될수 있습니다 . IRTX (4 핀 CIR1) IRRX ATX+5VSB (2 페이지 , 25 번 항목 참조 ) ASRock FM2A75 Pro4-M Motherboard...
  • Seite 114 에 따라 이헤더에 연결합니다 . 케이블을 연결하기 전에 양극 핀과 음극 핀 을 기록합니다 . PWRBTN( 전원 스위치 ): 섀시 전면 패널의 전원 스위치에 연결합니다 . 전원 스위치를 이용해 시스 템을 끄는방법을 구성할 수 있습니다 . ASRock FM2A75 Pro4-M Motherboard...
  • Seite 115 섀시 / 전원 팬 커넥터 팬 케이블을 팬 커넥터에 연결하 고 접지 핀에는 검은색 전선을 (4 핀 CHA_FAN1) 연결하십시오 . (2 페이지 ,12 번 항목 참조 ) (3 핀 PWR_FAN1) (2 페이지 , 1 번 항목 참조 ) ASRock FM2A75 Pro4-M Motherboard...
  • Seite 116 Pin 1 과 Pin 13 으로 전원공급장치를 연결하십시오 . 20 핀 ATX 전원 공급장치 설치 ATX 12V 파워 콘넥터 ATX 12V 전원 공급기를 이 헤 더에연결하십시오 . (8 핀 ATX12V1) (2 페이지 , 2 번 항목 참조 ) ASRock FM2A75 Pro4-M Motherboard...
  • Seite 117 이 메인보드는 섀시 커버가 제거 되면 이를 감지하는 케이스열림 (2 핀 CI1) 감지 기능을 지원합니다 . 이 기 (2 페이지 , 33 번 항목 참조 ) 능은 섀시에 섀시 침입 감지 디 자인이 있어야 가능합니다 . ASRock FM2A75 Pro4-M Motherboard...
  • Seite 118 하여 시작하시려면 , CD-ROM 드라이브에 CD 를 넣어주시기 바랍니다 . 만일 고객님 의 컴퓨터가 “AUTORUN” 이 가능하다면 자동으로 메인 메뉴를 모니터에 디스플 레이 시켜 줄 것입니다 . 만일 자동으로 메인 메뉴가 나타나지않는다면 , 보조 CD 의 디스플레이 메뉴 안에 있는 ASRSETUP.EXE 더블 클릭하여주시기 바랍니다 . ASRock FM2A75 Pro4-M Motherboard...
  • Seite 119 1.1 パッケージ内容 ASRock FM2A75 Pro4-M マザーボード: (Micro ATX フォームファクター : 9.6-in x 9.6-in, 24.4 cm x 24.4 cm) ASRock FM2A75 Pro4-M クイックインストレーションガイド ASRock FM2A75 Pro4-M サポート CD 2 x シリアル ATA (SATA) データケーブル(オプション) 1 x I/O パネルシールド ASRockからのお知らせ ... ®...
  • Seite 120 - HDMI 1.4a 搭載 Blu-ray Stereoscopic 3D 対応 - AMD Steady Video のサポート: 家庭 / オンラインビデオの 自動ジッター低減用の新しいビデオポストの処理機能 - HDCP、DVI ポートおよび HDMI ポートをサポート - 1080p Blu-ray (BD) / HD-DVD 再生サポート、DVI ポートお よび HDMI ポートをサポート オーディオ - 7.1 CH HD オーディオ ( コンテンツ保護付 ) ASRock FM2A75 Pro4-M Motherboard...
  • Seite 121 - CPU ファンコネクタ x 1 (1 x 4 ピン、1 x 3 ピン ) - シャーシファンコネクタ x 1 (4 ピン ) - 電源ファンコネクタ x 1 (3 ピン ) - 24 ピン ATX 電源コネクター - 8 ピン 12V 電源コネクター - フロントパネルオーディオコネクター ASRock FM2A75 Pro4-M Motherboard...
  • Seite 122 - jumperfree モードサポート - SMBIOS 2.3.1 サポート - DRAM、VDDP、VDDR、SB ブリッジ電圧 サポート CD - ドライバー、ユーティリティ、アンチウィルスソフトウェアハードウェア ( 体験版 )、AMD Live! Explorer、AMD Fusion、CyberLink MediaEspresso 6.5 試用版、ASRock MAGIX Multimedia Suite - OEM モニター - CPU 温度検知 - マザーボード温度検知 - CPU/ シャーシ / 電源ファンタコメータ - CPU/ シャーシ静音ファン...
  • Seite 123 デフォルト設定 CMOS の消去 注 : CLRCMOS1 により、CMOS のデータをクリアできます。システムパラメータをクリアしデフォルト設定にリ セットするには、コンピュータの電源をオフにし、電源装置から電源コードを抜いてください。15 秒待って から、ジャンパキャップを使用して CLRCMOS1 のピン 2 とピン 3 を 5 秒間ショートしてください。ただし、 BIOS 更新の後すぐには CMOS をクリアしないでください。BIOS の更新の終了後直ちに CMOS をクリア する必要がある場合、まずシステムを起動してからシャットダウンし、その後クリア CMOS アクションを実 行する必要があります。パスワード、日付、時刻、ユーザーデフォルトのプロファイルを忘れずにメモして ください。1394 GUID と MAC アドレスは、CMOS バッテリを取り外した場合のみ消去されます。 ASRock FM2A75 Pro4-M Motherboard...
  • Seite 124 USB_PWR USB 2.0 ヘッダ I/O パネルには、デフォルトの 4 つの USB 2.0 ポート以外に、このマザーボ (9 ピン USB5_6) DUMMY ードに 2 つの USB 2.0 ヘッダが搭載 ページ2, アイテム 22 を参照 されています。それぞれの USB 2.0 ヘッダは 2 つの USB 2.0 ポートをサ ポートできます。 USB_PWR ASRock FM2A75 Pro4-M Motherboard...
  • Seite 125 Dummy 赤外線モジュールコネクタ このコネクタは赤外線の無線送受信モ ジュールに対応します。 (5 ピン IR1) ページ2, アイテム 29 を参照 コンシューマー赤外線モジュールヘッダー このヘッダーは、リモコン受光部の接続 に使用することができます。 (4 ピン CIR1) IRTX IRRX ATX+5VSB ページ2, アイテム 25 を参照 フロントオーディオパネルコネクタ このコネクタは、オーディオ機器との便 利な接続とコントロールを可能にする (9 ピン HD_AUDIO1) フロンとオーディオパネルのためのイン ページ2, アイテム 30 を参照 ターフェイスです。 ASRock FM2A75 Pro4-M Motherboard...
  • Seite 126 ク ) タブを開きます。 “ Recording Volume ” ( 録音音量 ) を 調整します。 システムパネルコネクタ このコネクタは数種類のシステムフロン トパネルの機能を提供します。 (9 ピン PANEL1) ページ2, アイテム 21 を参照 シャーシに付いている電源スイッチ、リセットスイッチ、システムステータスイン ジケータを下記のピン割り当て指示に従ってこのヘッダに接続します。ケーブ ルを接続する前にピンの正負極性にご注意ください。 PWRBTN ( 電源スイッチ ): 前面パネルに付いている電源スイッチに接続します。電源スイッチによるシス テム電源オフ方法を設定して変更することも可能です。 RESET ( リセットスイッヱ ): シャーシの前面パネルに付いているリセットスイッチに接続します。コンピュータ がフリーズし、 正常な再起動をしない場合は、 リセットスイッチを押してコンピュー タを再起動します。 ASRock FM2A75 Pro4-M Motherboard...
  • Seite 127 ページ2, アイテム 20 を参照 動作中の際にオンになります。S1 ス テータスでは LED は点滅し続けます。 S3/S4 ステータス、または S5 ステー タス ( 電源オフ ) の場合、LED は消灯 します。 シャーシおよび電源ファンコネクタ ファンケーブルをファンコネクタに接続 し、黒いワイヤをアースピンに合わせて (4 ピン CHA_FAN1) ください。 ページ2, アイテム 12 を参照 (3 ピン PWR_FAN1) ページ2, アイテム 1 を参照 ASRock FM2A75 Pro4-M Motherboard...
  • Seite 128 ATX 12V コネクタ ATX 電 12V 源コネクタを接続します。 (8 ピン ATX12V1) ページ2, アイテム 2 を参照 このマザーボードで 8-pin ATX 12V 電源コネクタが提供されたが、従来の 4-pin ATX 12V 電源でも動作できます。 4-pin ATX 電源を使用する場合、電源を Pin 1 と Pin 5 とともに差し込んでください。 4-Pin ATX 12V 電源の取り付け ASRock FM2A75 Pro4-M Motherboard...
  • Seite 129 シリアルポートヘッダ この COM1 ヘッダは、シリアルポートモ ジュールをサポートします。 (9 ピン COM1) ページ2, アイテム 28 を参照 ケース侵入ヘッダ このマザーボードはケースオープン信 検出機能に対応しており、シャーシカバ (2 ピン CI1) ーが取り外されているかどうかを検出 ページ2, アイテム 33 を参照 します。この機能は、シャーシ侵入検出 設計を組み込んだシャーシを必要とし ます。 ASRock FM2A75 Pro4-M Motherboard...
  • Seite 130 3. ソフトウェア サポート CD 情報 ® ® このマザーボードは Microsoft Windows 7 / 7 64-bit / Vista / Vista 64-bit といった様々なマイクロソフト ウインドウズ オペレーティングシステムをサポートし ます。マザーボードに付属しているサポート CD はマザーボードの特徴を有効にするため に必要なドライバやユーティリティを含んでいます。サポート CD を使用するには、CDROM ドライブに CD を挿入してください。AUTORUN 機能が有効な場合、自動的にメインメニュ ウが立ち上がります。AUTORUN 機能が無効な場合、サポート CD 内にある ASRSETUP. EXE をダブルクリックすることにより、メインメニュウが立ち上がります。 ASRock FM2A75 Pro4-M Motherboard...
  • Seite 131 1. 主板簡介 謝謝你采用了華擎 FM2A75 Pro4-M 主板 , 本主板由華擎嚴格制造 , 質量可靠 , 穩定性 好 , 能夠獲得卓越的性能。本安裝指南介紹了安裝主板的步驟。更加詳細的主板信息 可參看驅動光盤的用戶手冊。 由于主板規格和 BIOS 軟件將不斷升級 , 本手冊之相關內容變更恕不另行 通知。請留意華擎网站上公布的升級版本。你也可以在華擎網站找到最新 的顯卡和 CPU 支持表。 華擎网址:http://www.asrock.com 如果您需要與此主板有關的技術支持 , 請參觀我們的網站以了解您使用機 種的規格信息。 www.asrock.com/support/index.asp 1.1 包裝盒內物品 華擎 FM2A75 Pro4-M 主板 (Micro ATX 規格 : 9.6 英吋 X 9.6 英吋 , 24.4 厘米 X 24.4 厘米 ) 華擎...
  • Seite 132 在線視頻提供自動降低抖動的功能 - 通過 DVI 和 HDMI 接口支持 HDCP - 通過 DVI 和 HDMI 接口可播放 10800 線藍光光盤 (BD) / HD-DVD 光盤 音效 - 7.1 聲道高保真音頻 , 支持內容保護功能 (Realtek ALC892 音頻編解碼器 ) - 支持優質藍光音效 - 支持 THX TruStudio ASRock FM2A75 Pro4-M Motherboard...
  • Seite 133 - 3 x USB 2.0 接口 ( 可支持 6 個額外的 USB 2.0 接口 ) - 1 x USB 3.0 接針 ( 可支持 2 個額外的 USB 3.0 接口 ) BIOS - 64Mb AMI BIOS - AMI UEFI Legal BIOS,支持 GUI ASRock FM2A75 Pro4-M Motherboard...
  • Seite 134 - 機箱開啟偵測 - 電壓範圍:+12V, +5V, +3.3V, 核心電壓 ® ® 操作系統 - Microsoft Windows 7/7 64 位元 /Vista /Vista 64 位元 适用于此主板 認證 - FCC, CE, WHQL - 支持 ErP/EuP( 需要同時使用支持 ErP/EuP 的電源供應器 ) * 請參閱華擎網站了解詳細的產品信息 : http://www.asrock.com ASRock FM2A75 Pro4-M Motherboard...
  • Seite 135 線帽將 C L R C M O S1 上的插針 2 和插針 3 短接 5 秒。但是,請勿在更新 B I O S 后 立即清除 C M O S。如果需要在更新 B I O S 后立即清除 C M O S,必須在執行 C M O S 清除操作之前,先啟動然后關閉系統。請注意,只有取出 C M O S 電池,密碼、 日期、時間、用戶默認配置文件、1394 GUID 和 MAC 地址才會被清除。 ASRock FM2A75 Pro4-M Motherboard...
  • Seite 136 (9 針 USB_5_6) DUMMY 三組 USB 2.0 接針。 這組 USB 2.0 ( 見第 2 頁第 22 項 ) 接針可以支持兩個 USB 2.0 接 口。 USB_PWR USB_PWR (9 針 USB_7_8) DUMMY ( 見第 2 頁第 24 項 ) USB_PWR ASRock FM2A75 Pro4-M Motherboard...
  • Seite 137 1. 高保真音頻 (High Definition Audio, HDA) 支持智能音頻接口檢測功能 (Jack Sensing), 但是機箱面板的連線必須支持 HDA 才能正常使用。請按我們提供的手冊 和機箱手冊上的使用說明安裝您的系統。2. 如果您使用 AC’97 音頻面板 , 請按 照下面的步驟將它安裝到前面板音頻接針 : A. 將 Mic_IN(MIC) 連接到 MIC2_L。 B. 將 Audio_R(RIN) 連接到 OUT2_R, 將 Audio_L(LIN) 連接到 OUT2_L。 C. 將 Ground(GND) 連接到 Ground(GND)。 ASRock FM2A75 Pro4-M Motherboard...
  • Seite 138 統處于 S1/S3 待機模式時 , 此指示燈保持閃爍。當系統處于 S4 待機模式 或關機 (S5) 模式時 , 此指示燈熄滅。 HD LED( 硬盤活動指示燈 ): 連接機箱前面板的硬盤動作指示燈。當硬盤正在讀取或寫入數據時 , 此指 示燈亮起。 前面板設計因機箱不同而有差異。前面板模塊一般由電源開關、重啟開 關、電源指示燈、硬盤動作指示燈、喇叭等構成。將您的機箱前面板連接 到此排針時 , 請確認連接線與針腳上的說明相對應。 機箱喇叭接頭 請將機箱喇叭連接到這個接頭。 (4 針 SPEAKER1) ( 見第 2 頁第 19 項 ) ASRock FM2A75 Pro4-M Motherboard...
  • Seite 139 連接到此主板的 CPU 風扇接口 , 請將它連接到 Pin 1-3。 Pin 1-3 連接 3-Pin 風扇的安裝 FAN_SPEED (3 針 CPU_FAN2) +12V ( 見第 2 頁第 6 項 ) ATX 電源接頭 請將 ATX 電源供應器連接到這個 接頭。 (24 針 ATXPWR1) ( 見第 2 頁第 9 項 ) ASRock FM2A75 Pro4-M Motherboard...
  • Seite 140 源接頭。 4-Pin ATX 12V 電源安裝說明 串行接口連接器 這個 COM1 端口支持一個串行接 口的外設。 (9 針 COM1) ( 見第 2 頁第 28 項 ) 機箱開啟警告功能接針 本主板支持機箱開啟偵測功能 , 可偵測機箱蓋是否被移動。此功 (2 針 CI1) 能需機箱具備機箱開啟偵測設計 ( 見第 2 頁第 33 項 ) 。 ASRock FM2A75 Pro4-M Motherboard...
  • Seite 141 進行常規檢驗。如果你需要在開機自檢 ( P O S T ) 之后進入 B I O S 設置程序,請按下 <Ctrl>+<Alt>+<Delete> 鍵重新啟動電腦,或者按下系統面板上的重啟按鈕。有關 BIOS 設置的詳細信息,請查閱隨機支持光盤裡的用戶手冊 (PDF 文件 )。 4. 支持光盤信息 ® ® 本主板支持各種微軟視窗操作系統:Microsoft Windows 7/7 64 位元 /Vista Vista 64 位元。主板隨機支持光盤包含各種有助于提高主板效能的必要驅動和實用 程序。請將隨機支持光盤放入光驅裡,如果電腦的“自動運行”功能已啟用,屏幕將 會自動顯示主菜單。如果主菜單不能自動顯示,請查找支持光盤內 B I N 文件夾下的 “ASSETUP.EXE”,并雙擊它,即可調出主菜單。 ASRock FM2A75 Pro4-M Motherboard...
  • Seite 142 明。 有害物質或元素 部件名稱 鉛 (Pb) 鎘 (Cd) 汞 (Hg) 六价鉻 (Cr(VI)) 多溴聯苯 (PBB) 多溴二苯醚 (PBDE) 印刷電路板 及電子組件 外部信號連 接頭及線材 O: 表示該有毒有害物質在該部件所有均質材料中的含量均在 SJ/T 11363-2006 標準規定 的限量要求以下。 X: 表示該有毒有害物質至少在該部件的某一均質材料中的含量超出 SJ/T 11363-2006 標準 規定的限量要求,然該部件仍符合歐盟指令 2002/95/EC 的規範。 備註 : 此產品所標示之環保使用年限,系指在一般正常使用狀況下。 ASRock FM2A75 Pro4-M Motherboard...
  • Seite 143 1. 主機板簡介 謝謝你採用了華擎 FM2A75 Pro4-M 主機板 , 本主機板由華擎嚴格製造 , 品質可靠 , 穩 定性好 , 能夠獲得卓越的性能。此快速安裝指南包括了主機板介紹和分步驟安裝指 導。您可以查看支持光碟裡的使用手冊了解更詳細的資料。 由於主機板規格和 BIOS 軟體將不斷更新 , 本手冊之相關內容變更恕不另 行通知。請留意華擎網站上公布的更新版本。你也可以在華擎網站找到最 新的顯示卡和 CPU 支援列表。 華擎網址:http://www.asrock.com 如果您需要與此主機板有關的技術支援 , 請參觀我們的網站以了解您使用 機種的規格訊息。 www.asrock.com/support/index.asp 1.1 包裝盒內物品 華擎 FM2A75 Pro4-M 主機板 (Micro ATX 規格 : 9.6 英吋 x 9.6 英吋 , 24.4 公分 x 24.4 公分 ) 華擎...
  • Seite 144 - DVI 和 HDMI 接口支援 HDCP - DVI 和 HDMI 接口可播放 1080p 藍光光碟 (BD) / HD-DVD 光碟 音效 - 7.1 聲道高清晰音效 , 支援內容保護功能 (Realtek ALC892 音效編解碼器 ) - 支援高級藍光音效 - 支援 THX TruStudio 網路功能 - PCIE x1 Gigabit LAN 10/100/1000 Mb/s ASRock FM2A75 Pro4-M Motherboard...
  • Seite 145 - 3 x USB 2.0 接頭 ( 可支援 6 個額外的 USB 2.0 接口 ) - 1 x USB 3.0 接頭 ( 可支援 2 個額外的 USB 3.0 接口 ) BIOS - 64Mb AMI BIOS - AMI UEFI Legal BIOS ( 支援 GUI) - 支援即插即用(Plug and Play,PnP) ASRock FM2A75 Pro4-M Motherboard...
  • Seite 146 - 機殼開啟偵測 - 電壓範圍:+12V, +5V, +3.3V, 核心電壓 ® ® 操作系統 - Microsoft Windows 7/7 64 位元 /Vista /Vista 64 位元 認證 - FCC, CE, WHQL - 支援 ErP/EuP( 需要同時使用支援 ErP/EuP 的電源供應器 ) * 請參閱華擎網站了解詳細的產品訊息 : http://www.asrock.com ASRock FM2A75 Pro4-M Motherboard...
  • Seite 147 註: C L R C M O S1 可供您清除 C M O S 中的資料。若要清除及重設系統參數並恢復為預設設 定,請先關閉電腦電源,並從電源插座中拔下電源線,等待 15 秒鐘之後,使用跳 線帽使 CLRCMOS1 的 pin2 及 pin3 短路 5 秒的時間。但請勿於更新 BIOS 後立即清除 CMOS。如需於更新 BIOS 後立即清除 CMOS,您必須先開機再關機,然後再執行 CMOS 清除操作。請注意,只有在移除 C M O S 電池的情況下,密碼、日期、時間、使用者 預設設定檔、1394 GUID 及 MAC 位址才會清除。 ASRock FM2A75 Pro4-M Motherboard...
  • Seite 148 (9 針 USB5_6) DUMMY 組 USB 2.0 接針。每組 USB 2.0 ( 見第 2 頁第 22 項 ) 接針可以支援兩個 USB 2.0 接口 。 USB_PWR USB_PWR (9 針 USB7_8) ( 見第 2 頁第 24 項 ) DUMMY USB_PWR ASRock FM2A75 Pro4-M Motherboard...
  • Seite 149 1. 高清晰音效 (High Definition Audio, HDA) 支援智能音效接口檢測功能 (Jack Sensing), 但是機箱面板的連線必須支持 HDA 才能正常使用。請按我們提供的手冊 和機箱手冊上的使用說明安裝您的系統。 2. 如果您使用 AC’97 音效面板 , 請按照下面的步驟將它安裝到前面板音效接針 : A. 將 Mic_IN(MIC) 連接到 MIC2_L。 B. 將 Audio_R(RIN) 連接到 OUT2_R, 將 Audio_L(LIN) 連接到 OUT2_L。 C. 將 Ground(GND) 連接到 Ground(GND)。 ASRock FM2A75 Pro4-M Motherboard...
  • Seite 150 統處於 S1/S3 待命模式時 , 此指示燈保持閃爍。當系統處於 S4 待命模式 或關機 (S5) 模式時 , 此指示燈熄滅。 HD LED( 硬碟活動指示燈 ): 連接機箱前面板的硬碟動作指示燈。當硬碟正在讀取或寫入數據時 , 此指 示燈亮起。 前面板設計因機箱不同而有差異。前面板模組一般由電源開關、重開開 關、電源指示燈、硬碟活動指示燈、喇叭等構成。將您的機箱前面板連接 到此接頭時 , 請確認連接線與針腳上的說明相對應。 機箱喇叭接頭 請將機箱喇叭連接到這個接頭。 (4 針 SPEAKER1) ( 見第 2 頁第 19 項 ) ASRock FM2A75 Pro4-M Motherboard...
  • Seite 151 連接到此主板的 CPU 風扇接口 , 請將它連接到 Pin 1-3。 Pin 1-3 連接 3-Pin 風扇的安裝 FAN_SPEED (3 針 CPU_FAN2) +12V ( 見第 2 頁第 6 項 ) ATX 電源接頭 請將 ATX 電源供應器連接到這個 接頭。 (24 針 ATXPWR1) ( 見第 2 頁第 9 項 ) ASRock FM2A75 Pro4-M Motherboard...
  • Seite 152 順著 Pin 1 和 Pin 5 插上電源接頭。 4-Pin ATX 12V 電源安裝說明 序列埠 這個序列埠 COM1 支援一個序列 埠的裝置。 (9 針 COM1) ( 見第 2 頁第 28 項 ) 機殼開啟警告功能接頭 此主機板支援機殼開啟偵測功能 , 可偵測機殼蓋是否被移動。此 (2 針 CI1) 功能需機殼具備機殼開啟偵測設 ( 見第 2 頁第 33 項 ) 計。 ASRock FM2A75 Pro4-M Motherboard...
  • Seite 153 之常規檢驗。如果需要在開機自檢後進入 BIOS 設置程序,請按下 <Ctl> + <Alt> + <Delete> 鍵重新啟動電腦,或者按下系統面板上的重開按鈕。功能設置程序儲存有主 板自身的和連接在其上的設備的缺省和設定的參數。這些訊息用於在啟動系統和系統 運行需要時,測試和初始化元件。有關 B I O S 設置的詳細訊息,請查閱隨機支援光碟 裡的使用手冊 (PDF 文件 )。 3. 支援光碟訊息 ® ® ® 本主板支援各種微軟 Windows 操作系統:Microsoft Windows 7/7 64 位元 / Vista /Vista 64 位元。主板附帶的支援光碟包含各種有助於提高主板效能的必要 驅動和實用程式。請將隨機支援光碟放入光碟機裡,如果系統的“自動運行”功能已 啟用,銀幕將會自動顯示主菜單。如果主菜單不能自動顯示,請查閱支援光碟內的 ASRSETUP.EXE 文件並雙點它,即可調出主菜單。 ASRock FM2A75 Pro4-M Motherboard...
  • Seite 154 Dalam kondisi terjadinya modifikasi buku pedoman ini, versi baru akan diperlihatkan dalam website ASRock tanpa peringatan lebih. Anda dapat mendapatkan kartu- kartu yang paling baru dan daftar bantuan CPU pada website ASRock.
  • Seite 155 - Mendukung HDCP dengan port DVI dan HDMI - Mendukung pemutaran 1080p Blu-ray (BD) / HD-DVD dengan port DVI dan HDMI Audio - 7.1 CH HD Audio dengan Content Protection (Realtek ALC892 Audio Codec) - Menggunakan Premium Blu-ray audio ASRock FM2A75 Pro4-M Motherboard...
  • Seite 156 - Penghubung power 8 pin 12V - Penghubung audio panel dapan - 3 x USB 2.0 header (menggunakan 6 port USB 2.0) - 1 x USB 3.0 header (menggunakan 2 port USB 2.0) Ciri-ciri BIOS - 64Mb AMI Legal BIOS ASRock FM2A75 Pro4-M Motherboard...
  • Seite 157 ® - dapat digunakan Microsoft Windows 7 / 7 64-bit / Vista Vista 64-bit Sertifikasi - FCC, CE, WHQL - ErP/EuP Ready (memerlukan catu daya ErP/EuP ready) * Untuk informasi rinci, silakan kunjungi website kami: http://www.asrock.com ASRock FM2A75 Pro4-M Motherboard...
  • Seite 158 Option #1. (“xxx” is the device which contains your Windows installation files. Normally it is an optical drive.) You can also press <F11> to launch boot menu at system POST and choose the item “UEFI:xxx“ to boot. ® 4. Start Windows installation. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 159 4. Press <F11> to enter Boot Manual. Choose UEFI : Built - in EFI Shell. 5. Key in drvcfg, for example you will see below: Drv[4E] Ctrl[B5] Lang[eng] 6. Key in dh [Drv number], for example: key in dh 4E. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 160 For example: key in drvcfg –s 4E B5. 8. Choose Logical Drive Main Menu to set up Raid Drive. 9. Choose Logical Drive Create Menu to create a Raid Drive. 10. Choose Usable Physical Drive List to select Raid HDD. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 161 13. After set up Raid size, please click Start to Create. 14. Press <F10> to exit Utility. 15. During reboot, please press <F11> to enter Boot Manual. Choose UEFI: SCSI CD/DVD Drive. ® * This option only shows on Windows 7 64-bit and Vista 64-bit OS. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 162 ® Microsoft suggested solution: A. Disable System Restore. a. Type “systempropertiesprotection” in the Start Menu. Then press "Enter". b. De-select Local Disks for System Restore. Then Click “Turn System Restore Off” to confirm. Then Press “Ok”. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 163 B. Disable “Volume Shadow Copy” service. a. Type “computer management” in the Start Menu, then press “Enter”. b. Go to “Services and Applications>Services”; Then double click “Volume Shadow Copy”. c. Set “Startup type” to “Disable” then Click “OK”. ASRock FM2A75 Pro4-M Motherboard...
  • Seite 164 (This may take long time; >30 mins.) C. Reboot your system. (It may take about 5 mins to boot.) ® D. The Windows will install this hotfix then reboot by itself. E. Please start to install motherboard drivers and utilities. 17. Finish. ASRock FM2A75 Pro4-M Motherboard...

Inhaltsverzeichnis