Preliminary Instructions - Olimpia splendid Caldo Vintage Installations-, Bedienungs- Und Wartungsanweisungen

PRELIMINARY INSTRUCTIONS

- Take the appliance out of the cardboard box and unwind the cable to
its full length.
- Place the appliance on a firm, flat surface, in a stable upright position.
- Make sure switch "1" is turned to "0".
Selecting functions
- To activate the FAN function, turn knob "1" to position " ".
- To activate the MINIMUM POWER function, turn knob "1" to
position " ".
- To activate the MAXIMUM POWER function, turn knob "1" to
position " ".
Setting the thermostat
- To set the room temperature to a given value
(thermostatting function), turn knob "3" clockwise until it stops.
Once the required temperature has been reached in the room, turn
knob "3" slowly counter-clockwise until you hear a "click". The appliance
will now switch off the heating element, but not the fan, until the room
temperature drops below the value set. The heating element will then
switch itself on again automatically until the room temperature reaches
the set value again.
Indicator light "6" is on when the appliance is working.
EN
19
Caldo Vintage