Tare Zeroing - DigiDevice FIVE UF1-Serie Bedienungsanleitung

If the siren is active it will perform an intermittent sound during the final phases of
unloading.
If the printer is active, at the end of the unload, the value will be printed.
Load Formula
To execute a batching formula
•
Press the key and confirm the menu item
•
Select the number of the formula that will be executed and press
•
Load the components displayed in the Dialog Area.
If the siren is active it will perform an intermittent sound during the final phases of
components loading.
If the printer is active, at the end of the load of each component, the values stored in
formula and the loaded amounts of each component are printed
•
If the system is settled for automatic components step, after the loading of each
component is finished, the system requires the loading of the next one. If not, the
should be pressed to go to the next component.
•
After the last component of the formula has been loaded, the system displays the
remaining mixing time. Press
NOTE: If the remaining amount to be loaded of a component has wrongly changed, due to a
system movement or wrong positioning, the programmed value to be loaded of that component
can be restored by pressing the
Down Key Functions
Weight Lock and Unlock
To lock the weight value during system
The last measured weight value blinks. In the same way, press again the
second to unlock the weight value.
This function can be used during the load / unload operations and in Total Weight display.
Clear Key Functions

Tare Zeroing

To zero the tare value, in the Total Weight display, press for about 3 seconds the
OK and the value
-----
displayed.
load, do the following operations:
to stop that countdown.
key.
movements, press for about a second the
will briefly appear on the display, before the new Total Weight will be
"load FORMULA" with
User Manual
.
.
key
key.
key for about a
key. TARe
23
EN