DigiDevice FIVE UF1-Serie Bedienungsanleitung Seite 22

EN
DigiDevice
Clock
Once in the clock setting procedure, use the
date and confirm the modifications with
Siren
If this parameter is ON, the siren performs an intermittent sound during the final phases of
loading and unloading.
Printer
If this parameter is ON, the printer connected to the system (optional) allow printing of the data
referring loads and unloads during the operations and the values of the batched amounts and
displayed weight.
Repeater
If settled ON, the weight repeater connected to the system (optional) shows the weight values
displayed on the system.
Settings recovery
By selecting YES, a sequence starts to lead the user to change the values of all the working
parameters of the system, as they were when it was new.
Reserved Area
Settings only for personnel involved in system installation and maintenance.
NOTE: The menu is protected by a password.
Load/Unload Key Functions
Load Execution
To execute a load, do the following operations:
•
Press the
•
Set the weight to be loaded and press
•
Load the weight.
If the siren is active it will perform an intermittent sound during the final phases of
loading.
If the printer is active, at the end of the load, the value will be printed.
Unload Execution
To execute an unload, do the following operations:
•
Press the
with .
•
Set the weight to be unloaded and press
•
Unload the weight.
22
key and confirm the menu item "load" with
key and select with the
and keys to adjust the system clock and
or cancel with .
.
.
and keys the menu item "unload". Confirm
.