DigiDevice FIVE UF1-Serie Bedienungsanleitung Seite 21

NOTE: Selecting the Dynamic option, the system uses a new dynamic weight filtering to
guarantee stability and precision during the weighing phase, even if the system
is moving.
Undo Tare
A procedure to undo the last zeroing of the Total Weight starts. The Total Weight that the
indicator will display after the undo operation is displayed. To do this operation a confirmation
is needed.
Master Weight Calibration
A procedure will help the user to perform a system calibration using a sample weight. Follow
the instructions to do thr calibration.
NOTE: The more the sample weight value is near to the system maximum capacity, the higher
will be the calibration accuracy. Using a too light sample weight could lead to low accuracy
calibration of the system.
NOTE: CAUTION: This operation cannot be canceled and must be done only if really needed.
Sensors Type
In this menu the weight sensors of the system can be selected in a database. Select an
available sensors type with the
NOTE: CAUTION: This operation must be done only if really needed and by qualified
personnel.
Settings
To define the System
menu item "settings". Confirm with the
Go through the below descript menu items with the
show the settings. For settings modifying, change the value with the
confirm with or cancel with
Language
By selecting an available language, with the
settled. Confirm the modification with
Contrast
By selecting an available value, with the
adjusted, to obtain better visualization. Confirm the modification with
and
Settings, press the
.
or cancel with
keys, than confirm with
key and select with the
key.
and
and keys, the system language can be
.
and keys, the display contrast can be
User Manual
or cancel with
and keys the
keys and then press
and keys, then
or cancel with
EN
.
to
.
21