DigiDevice FIVE UF1-Serie Bedienungsanleitung Seite 19

If the printer is active, when pressing
displayed weight value together with hour and date. Select "YES" with
.
Net/Zero Key Functions
Partial Weight
To show the partial weight
weight value is displayed in the display dialog area, after the
If the printer is active, when pressing
displayed weight value together with hour and date. Select "YES" with
.
New Partial
To do a fully manual load, load all the components and, at the end of each component loading,
press the key to zero the partial weight. The total weight value is displayed in the display
dialog area, after the
Zero Value / Data
To zero a value or a data during
batched amount of components or formulas).
Menu Key Functions
Programming a Load
To store in memory the loading phase of a batching
•
Press the key and confirm the menu item
•
Select the number of the formula that need to be modified or inserted and press
•
If the system is settled for batching the stored percentage of the formula (§ Execution
Options – Formula Percentage), the last stored percentage will be displayed. Select the
percentage to be batched through the
•
Select the amount of the Component 1 to be loaded (in kg) with the keys
press .
•
Insert the amount to be loaded of each component and, after the last one, set the mixing
time (in minutes), by the
NOTE: To immediately exit from the load menu, press the
access the Total Weight display.
the system requires to confirm for printing the
value, from the total weight display, press the
the system requires to confirm for printing the
G symbol (Gross).
setting, press the
and
symbol (Gross).
G
key when needed (i.e.: zeroing the
formula, do the following operations:
"load prog." with the
and keys and then press
keys and then confirming the data with
key for about 2 seconds to
User Manual
and confirm with
key. The total
and confirm with
key.
.
.
and and
.
19
EN