Troubleshooting - Whirlpool 400011203122 Anleitung

CLEANING
Make sure that the appliance has cooled down before
carrying out any maintenance or cleaning.
INTERIOR AND EXTERIOR SURFACES
• Clean the surfaces with a damp microfibre cloth.
If they are very dirty, add a few drops of pH-neutral
detergent. Finish off with a dry cloth.
• Clean the glass in the door with a suitable liquid
detergent.
• At regular intervals, or in case of spills, remove the
turntable and its support to clean the bottom of the
oven, removing all food residue.
• The grill does not need to be cleaned as the intense
heat burns away any dirt. Use this function on a regular
basis.

TROUBLESHOOTING

Problem
The oven is not working.
The oven makes noises, even when it is
switched off.
The display shows the letter "F" followed
by a number.
PRODUCT FICHE
The product fiche with energy data of this
WWW
appliance can be downloaded from Whirlpool website
docs . whirlpool . eu
HOW TO OBTAIN THE USE AND CARE GUIDE
> Download the Use and Care Guide
WWW
from our website docs . whirlpool . eu (you can
use this QR Code), specifying the product's
commercial code.
> Alternatively, contact our Client After-sales Service.
6
Possible cause
Power cut.
Disconnection from the mains.
Cooling fan active.
Software fault.
Never use steam cleaning equipment.
Do not use wire wool, abrasive scourers or abrasive/
corrosive cleaning agents, as these could damage the
surfaces of the appliance.
ACCESSORIES
All accessories are dishwasher safe with the exception
of the Crisp plate.
The Crisp plate should be cleaned using water and a
mild detergent. For stubborn dirt, rub gently with a
cloth. Always leave the Crisp plate to cool down before
cleaning.
Solution
Check for the presence of mains electrical power and
whether the oven is connected to the electricity supply.
Turn off the oven and restart it to see if the fault persists.
Open the door or hold or wait until the cooling process has
finished.
Contact you nearest Client After-sales Service Centre and
state the number following the letter "F".
CONTACTING OUR AFTER SALES SERVICE
You can find our contact
details in the warranty
manual. When contacting
our Client After-sales
Service, please state the
codes provided on your
product's identification
plate.
XXX/XXX
XXXXXXXXXXXX
XXXXXXXXXXXX
400011203122
Printed in Italy