Caution The proximal end tip of installed lightguides and accessories can become hot. Allow
end tips to cool before removing.
Caution
The end user is responsible to verify the cable and port are correctly matched before
light guide insertion, otherwise cable or light source damage may occur.
Caution
Only FUSED light guides manufactured by Sunoptic Technologies
with the LED-4000
If while in use there is a momentary power interruption the LED-4000 will shut-down
Caution
and automatically restart itself if the power switch remains in the ON position; however there may be a
restart delay as internal components reset for normal operation.
LIT-216 SUNOPTIC TECHNOLOGIES
(English)
®
Date of Revision:01/27/16
®
should be used
Rev. -
Page 5 of 72