Alarm Parameters - Videotec SW164OSM Bedienungsanweisung

Alarm parameters

From the main menu, press
Select theparameters to access by keying in the respective number.
Alarm contacts
From ALARM menu, press
TYPE submenu.
Three types of alarm contacts are available:
•
normally open
NO
•
normally closed
NC
•
not used.
--
Press the relevant number (1/16) to modify the type of
contact.
M
copies the definition of the first contact to all the others.
P
confirms the modifications and returns to the previous
menu
Alarm groups
From ALARM menu, press
submenu.
Each alarm contact corresponds to a group of video inputs
(the "alarm group")
In the shown example, when the contact 2 is alarmed,inputs
1, 2, 3 and 7 are displayed in sequence cycle.
The contact to be configured is selected by
Pressing the number 1/16, each input to be displayed is
activated (x) or disabled (-).
C
Clear returns to basic configuration, erasing the present
modifications.
P
confirms and returns to the previous menu.
3
to access the ALARM submenu.
1
to access the CONTACT
2
to access the GROUP
U
and
Alarm contact
number
Alarm contact
Group of inputs
D
.
Page 21
ALARMS
------------------------
1. Contact types
2. Groups
3. Time cycle
4. Reset
5. Acknowledgement
6. Other parameters
------------------------
PROG.End
CONTACT TYPE
------------------------
1.NO 9.-- Push 1/16
2.NO 10.-- to toggle
3.NO 11.-- contact
4.NO 12.-- type
5.NC 13.--
6.NC 14.-- M/A.Copy
7.—- 15.-- first
8.—- 16.--
------------------------
PROG.End
ALARM GROUPS
------------------------
Alarm no.2
1.X 9.- Push 1/16
2.X 10.- to toggle
3.X 11.-
4.- 12.- .Next alarm
á
5.- 13.- â .Prev.alarm
6.- 14.-
7.X 15.- CLEAR.Default
8.- 16.- PROG.End
SW164OSM 9901
3.
3.1
3.2