Video Quality; Image Orientation - OWIM SOKL 1920 B2 Montage-, Bedienungs- Und Sicherheitshinweise

e-mail receiver account . Images or video will not be included in the e-mail .
Base settings
When receiving an alert: Go to your "SilverCrest IP CAM S-K 1920" App to
load the live view of your surveillance camera's monitoring area to check if there
has been an incident (e .g . burglar inside your house) .
Video settings
Sensitivity
setting
selected .
MicroSD card
settings
24 GB
NOTE: The e-mail notification system will only send alert notices to your

Video Quality

Set the video quality . The better the quality, the larger the file size of the
recorded video .
Environment Mode
Select the surrounding environment type based on the frequency of the
electrical network:
1 . 50 Hz – intended for indoor surveillance for Europe .
2 . 60 Hz – intended for indoor surveillance for North America .
3 . Outdoor – intended for outdoor surveillance around the globe .
NOTE: Incorrect settings might cause image flickering .
Low Light Enhancement
This function is intended for improving the night video quality by setting
5 different light levels (5 = brightest) .

Image Orientation

This function is intended to change screen orientation . When the camera
is installed on a ceiling, make sure to select the "Flip" option .
Detect Mode
Set camera's detection mode:
1 . Off
2 . PIR Enable – Select to use built-in PIR motion detector
activities motion detection . The PIR will only track and detect (body)
heat generated by an animal or a vehicle . Human beings can also
trigger the sensor .
3 . Software – Select to use software detection algorithm for motion
triggered recording factor . The software algorithm will track and
detect all minor/major movements that cause changes of picture .
Motion Detection
Set the sensitivity of motion detection during day and night .
Motion Mask
Choose the image areas which should not detect motion .
NOTE: The above 2 options are available only if "Software" mode is
Format microSD card
Delete all the stored data .
Overwrite microSD card
Activate this function to automatically start overwriting the oldest data
when the microSD card capacity is insufficient .
NOTE: Back up your video files before formatting the microSD card .
for biotic
2