OWIM SOKL 1920 B2 Montage-, Bedienungs- Und Sicherheitshinweise Seite 21

Advanced settings for an iOS system:
PASSWORD
SETTINGS
password set during the initial configuration . A reset clears all the assigned
passwords . The camera must then be reinstalled .
TIME SETTINGS
VIDEO
SETTINGS
WI-FI SETTINGS
frequency band Wi-Fi router .
SENSITIVITY
SETTING
Admin Password
The Admin Password is intended to access the advanced settings .
Device Security Code
The Device Security Code is intended to access the camera's live view
only .
NOTE: By default, both above listed passwords are the same as the
Time Zone
Set a GMT time zone at your location .
Daylight Saving
Time Stamp
Change the location and the colour of the time stamp tab .
Video Quality
Set the video quality . The better the quality, the larger the file size of the
recorded video .
Environment Mode
Select the surrounding environment type based on the frequency of the
electrical network:
1 . 50 Hz – intended for indoor surveillance for Europe .
2 . 60 Hz – intended for indoor surveillance for North America .
3 . Outdoor – intended for outdoor surveillance around the globe .
NOTE: Incorrect settings might cause image flickering .
Low Light Enhancement
This function is intended for improving the night video quality by setting
5 different light levels (5 = brightest) .
Image Orientation
This function is intended to change screen orientation . When the camera
is installed on a ceiling, make sure to select the "Flip" option .
Choose the Wi-Fi network for wireless connection with the camera .
NOTE: The camera can only connect to a 2 .4 GHz (802 .11b/g/n)
Detect Mode
Set camera's detection mode:
1 . Off
2 . PIR Enable – Select to use built-in PIR motion detector
activities motion detection . The PIR will only track and detect (body)
heat generated by an animal or a vehicle . Human beings are also
detected by the sensor .
for biotic
2
GB 21