Ce Declaration Of Conformity - GMC LTP30 Bersetzung Der Originalbetriebsanleitung

Technical Abbreviations Key
V
Volts
~ Alternating current
A Ampere
n
No load speed
0
Hz Hertz
W, kW Watt, kilowatt
/min or min (revolutions or reciprocation) per minute
-1

CE Declaration of Conformity

The undersigned: Mr Darrell Morris
as authorised by: GMC Tools
Declares that
This declaration has been issued under the sole responsibility of the manufacturer.
The object of the declaration is in conformity with the relevant Union harmonisation
Legislation.
Identification code: LTP30
Description: 30cc Petrol Line Strimmer
Conforms to the following directives and standards:
• Machinery Directive 2006/42/EC
• EMC Directive 2014/30/EU
• Outdoor Noise Directive 2000/14/EC
• EN ISO 11806-1:2011
• EN ISO14982:2009
Applied Conformity Evaluation Method
2000/14/EC : Annex III
Sound Power Level dB (A)
Measured: 94
Guaranteed: 118
Notified body: Intertek
The technical documentation is kept by: GMC Tools
Date: 19/04/2016
Signed:
Mr Darrell Morris
Managing Director
Name and address of the manufacturer:
Powerbox International Limited, Company No. 06897059. Registered address:
Central House, Church Street, Yeovil, Somerset BA20 1HH, United Kingdom.
Specification
Model: LTP30
Engine type: Air-cooled, 2-stroke
Displacement: 30cc
No load speed: 7800min
Max. power output: 1000W (1.34hp)
Fuel/oil mix ratio: 40:1
Ignition: Electronic
Spark plug: Torch l8rtc
Fuel tank capacity: 500ml
Cutting path diameter: 430mm
Line cord diameter: 2mm
Net weight: 5.2kg
As part of our ongoing product development, specifications of GMC products may alter without
notice.
Sound and vibration information:
Sound Pressure L :
PA
Idle: 76.1dB(A)
Racing: 96.5dB(A)
Sound Power L : 112dB(A)
WA
Uncertainty K: 3dB
Weighted vibration a (main handle):
h
Idle: 2.475m/s
Racing: 9.839m/s
a (auxiliary handle):
h
Idle: 3.192m/s
Racing: 8.935m/s
Uncertainty K: 1.5m/s
The sound intensity level for the operator may exceed 85dB(A) and sound protection measures
are necessary.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the time
of exposure if necessary. If sound levels are uncomfortable, even with ear protection, stop using the
tool immediately and check the ear protection is correctly fitted and provides the correct level of
sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness, tingling
and reduced ability to grip. Long-term exposure can lead to a chronic condition. If necessary, limit
the length of time exposed to vibration and use anti-vibration gloves. Do not operate the tool with
hands below a normal comfortable temperature, as vibration will have a greater effect. Use the
figures provided in the specification relating to vibration to calculate the duration and frequency of
operating the tool.
Sound and vibration levels in the specification are determined according to EN60745 or similar
international standards. The figures represent normal use for the tool in normal working conditions.
A poorly maintained, incorrectly assembled, or misused tool, may produce increased levels of noise
and vibration. www.osha.europa.eu provides information on sound and vibration levels in the
workplace that may be useful to domestic users who use tools for long periods of time.
7
-1
2
2
2
2
2
GB