Maintenance - Beninca BISON 45 OTI Bedienungsanleitung

BISON
SAFETY MEASURES
• Do not stand within the gate movement area.
• Children must not play with controls and near the gate.
• In the event of malfunctions, do not attempt to repair the
failure but contact the specialised personnel.
MANUAL OPERATION
In the event of power failure or faults, the gate can be
manually operated as follows (Fig.1):
- Open the protective cap from the lock, introduce the
customized key supplied and turn it by 90° anti-clockwise.
- Remove the lock unit, insert the hexagonal screw and
unscrew (anticlockwise) until the gate runs freely
- The gear motor is released and the gate can be manually
opened or closed.
- To engage the gears insert again the hexagonal screw
and screw tightly clockwise until it stops, then make some
openings to check that the gears are engaged firmly
- Apply the lock group again, making sure that the anti-
rotation pin be introduced in the hole on the gear group.
- Turn the key clockwise, then remove it and close the
protection cap again.

MAINTENANCE

• Every month check the good operation of the emergency
manual release.
• It is mandatory not to carry out extraordinary maintenance
or repairs as accidents may be caused.These operations
must be carried out by qualified personnel only.
• The operator is maintenance free but it is necessary to
check periodically if the safety devices and the other
components of the automation system work properly. Wear
and tear of some components could cause dangers.
1
26
USER'S HANDBOOK
All Benincá products are covered by insurance policy for
any possible damages to objects and persons caused by
construction faults under condition that the entire system
be marked CE and only Benincá parts be used.
1
3
WASTE DISPOSAL
As indicated by the symbol shown, it is
forbidden to dispose this product as normal
urban waste as some parts might be harmful
for environment and human health, if they are
disposed of incorrectly. Therefore, the device
should be disposed in special collection
platforms or given back to the reseller if a
new and similar device is purchased. An
incorrect disposal of the device will result in
fines applied to the user, as provided for by
regulations in force.
WARNING
2
4