Maintenance, Repairs And Warranty; Storage; Cleaning; Repairs - SoFlow Flowboard Air Originalbetriebsanleitung

User Manual

5. Maintenance, repairs and warranty

5.1 Storage

Please store the Flowboard AIR in a dry place. If left unused, recharge the battery every month to maintain longevity of the
battery and to avoid damage. The speed of self-discharge is higher in cold temperatures (e.g. in winter) compared to a warm
environment. Never store the device under direct sunlight (e.g. not in the trunk of a car). The temperature of the Flowboard
AIR and its battery could rise above 50°C which could lead to irreparable damage. The battery also takes damage when cooler
than -20°C.

5.2 Cleaning

In order to avoid rust on the device, you should clean and dry the Flowboard AIR after every use. Use a slightly moist sponge
for the cleaning and dry the device afterwards with a towel. The cleaning of screws and the ball bearings can especially
increase the longevity of the device. Do not use much water, since the electricity of the device can take damage through
water. Also never use corrosive cleaning substances, sucht as alcohol or petroleum for cleaning. Never use a pressure cleaner
for the Flowboard AIR.

5.3 Repairs

The Flowboard Air must only be repaired with original spare parts from a licensed supplier or shop and by a licensed
mechanic. The opening, disassembly or modification of the Flowboard Air with non-licensed or non-original parts or by a
non-licensed person will lead to the warranty becoming invalid.
copyright by www.so-flow.com 23
Flowpad Bedienungsanleitung