Tektronix TDS3ION Handbuch Seite 9

Description
TDS3ION Battery Charger Instructions
The TDS3ION is a battery charging base for use with the TDS3BATC battery
packs. Typical charge time is for the TDS3BATC is approximately 6 hours. (See
Figure 1.)
Table 1: Status LED indicators
Charger state
Unplugged
Battery is connected, but is
fully charged
Battery is charging
Table 2: Specifications
Description
Input
Output
Operating temperature
Maximum operating altitude
Operating humidity
Table 3: Power cord options
Region/voltage
North America 125 V,
15 A Plug NEMA 5-15P
Europe 230 V
United Kingdom 230 V
Australia 230 V
North America 230 V
Switzerland 230 V
Japan 100 V
Charge indicator
Off
Off
Yellow
Specification
100-240 VAC, 50/60 Hz, 1.0 A
30 W, 18 VDC, 1.67 A (current
limited)
+5 °C to +50 °C (+41 °F to 122 °F)
3000 m
10% to 80%
Option Part number
161-0230-01
Standard
A1 161-0104-06
A2 161-0104-07
A3 161-0104-05
A4 161-0104-08
A5 161-0167-07
A6 161-0298-00
Description
7