Patton 54GCPR000 Gebrauchsanweisung Seite 28

ASSEMBLY PRIMO
Make sure your grill is assembled properly. Detailed assembly instructions are packed with each grill giving specific as-
sembly procedures for each model. Follow these instructions carefully to ensure the correct and safe assembly of the grill.
Remove all contents from the carton packaging. Make sure all parts are present before attempting assembly.
Remove all contents from the carton packaging. Make sure all parts are present before attempting assembly.
Once the grill is fully assembled, go back and check to make certain all the bolts are secure.
Once the grill is fully assembled, go back and check to make certain all the bolts are secure.
Remove all contents from the carton packaging. Make sure all parts are present before attempting assembly.
Caution: Although we take every effort to ensure that the assembly process is as easy as possible, it is inherent with fa-
Tighten again only if necessary.
Once the grill is fully assembled, go back and check to make certain all the bolts are secure. Tighten again only if necessary.
bricated steel parts that corners and edged can cause cuts if improperly handled during assembly procedures. Be careful
Tighten again only if necessary.
while handling any parts during assembly. It is strongly recommended that you protect hands with a pair of work gloves. Step 1:
Step 1:
Step 1:
Unpack the box, and take out the body. Open the legs as the diagram.
Unpack the box, and take out the body. Open the legs as the diagram.
Unpack the box, and take out the body. Open the legs as the diagram.
STEP 1 - Unpack the box, and take out the body. Open the legs as the diagram.
Step 2:
Step 2:
1. Attach the left side wing on the body with M6x4PCS (15mm).
1. Attach the left side wing on the body with M6x4PCS (15mm). Step 2:
1. Attach the left side wing on the body with M6x4PCS (15mm).
2. Attach the right side wing same as left side.
STEP 2 - 2. Attach the right side wing same as left side. 1. Attach the left side wing on the body with M6x4PCS (15mm).
2. Attach the right side wing as left side.
2. Attach the right side wing same as left side.
Step 3: Before attaching the right side wing, insert the valve outlet into the burner tube. Attach the
Step 3: Before attaching the right side wing, insert the valve outlet into the burner tube. Attach the
spark electrode wire onto the gas valve.
spark electrode wire onto the gas valve. Step 3: Before attaching the right side wing, insert the valve outlet into the burner tube. Attach the
STEP 3 - Before attaching the right side wing, insert the valve outlet into the burner tube.
spark electrode wire onto the gas valve.
Attach the spark electrode wire onto the gas valve.
GB, IE
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
28