Werbung
Verfügbare Sprachen
Verfügbare Sprachen
English
17. INSTALLATION INSTRUCTIONS
Comply with safety distance between hob and hood.
10.
Fix the mounting bracket B4
2 wall plugs.
11.
Fix the mounting bracket B7 for the internal chimney shaft B8 in the same way high on the wall.
B3
12.
Fix the exhaust hose B12 on its final position according to B13
13.
Slide
the chimney shafts B6 & B8
carefully, that the external (lower) chimney shaft hangs on the mounting bracket B4
14.
Slide the internal chimney shaft B8 up and fix it on the mounting bracket B7
15.
Connect the product cable to the power supply and assemble the metal grease filter.
According to the specific situation the assembly procedure might proceed differently.
Fitting the V-flaps:
• First install half part
B10
• Pins
3
must be top oriented.
• Insert the axle
4
in the hole
the nozzle B10
Repeat all operations for
•
the assembly of the half part
fi180528TNM
Installation- & User's Instruction
for the external (lower) chimney shaft with 2 screws on the wall using
one inside the other and put them on the cooker hood. Then check
1
in the nozzle
5
on
2
Inclined Cooker hoods
(See chapter 11.1)
B15
or B14..
B10
5
13
Figures are for illustration purposes only
with 2
2
4
3
1
GB
Werbung
