6 - English
Getting started
The KB100 SCR keyboard features an integrated smartcard reader on the top.
The smartcard reader can be used to read and write smartcards. Corresponding software is required
for this purpose, e.g. for smartcard login, online banking or applications with digital signatures.
Please insert the smartcard into the smartcard reader with the chip facing towards you.
Connecting the device to USB port
Your device is a plug-and-play device. You can connect the device while the PC is running, so there is
no need to switch it off first.
►
Insert the USB connector into one of the available USB ports on your PC.
The device will be recognized automatically. The operating system will then attempt to install the
drivers.
Installing drivers and software
Drivers need to be installed before you can use the smartcard reader.
The necessary drivers and software tools you can find at http://www.fujitsu.com/fts/download.
►
Follow the instructions in the New Hardware Wizard, which guides you through the installation.
6
Fujitsu