Memory Button - Panasonic AW-RP555L Bedienungsanleitung

Parts and their functions
 CONTROL buttons [1] to [5]
Pressing buttons 1 to 5 will select the connected pan/tilt head system.
When the AW-RC400 is connected, the button of the chosen number will illuminate and
the video signal from the selected pan/tilt head system will be output to the AW-RC400's
MONITOR OUT 1 to 2 terminals.
 IRIS LEVEL control
This is used to adjust the iris of the lens in the pan/tilt head system currently selected.
When the IRIS button is set to MANU, the control can move the lens iris all the way from
wide open to fully closed. When it is turned clockwise, the lens iris is opened; conversely,
when it is turned counterclockwise, it is closed.
When the IRIS button is set to AUTO, the control can be used to adjust the [Video level]
setting on the camera menu to adjust the focusing level of the automatic iris operation.
When it is turned clockwise, the lens iris is opened; conversely, when it is turned
counterclockwise, it is closed.
p The lens iris is designed to be set only when the IRIS LEVEL control is moved.
p With this control panel, the auto iris adjust function of the camera menu is
cancelled.
 IRIS [AUTO/MANU] button
This is used to select how to adjust the lens iris of the pan/tilt head system currently
selected.
Each time it is pressed, the AUTO or MANU setting is selected in turn.
AUTO: The lens iris is adjusted automatically, and the IRIS button's lamp comes on.
MANU: The lens iris is adjusted manually using the IRIS LEVEL control.
During this operation, the IRIS button lamp goes off.
NOTE
If the camera's power has been turned on after this unit's power was turned on or if
the camera's power has been turned off because of a power outage or other trouble,
the camera will operate in the AUTO mode regardless of the IRIS button setting, so
select the adjustment method again using the IRIS button.

 MEMORY button

The lamp of this button goes off when communication has been established successfully
with the pan/tilt head system currently selected; it flashes when communication has
failed. If the lamp flashes, select a different pan/tilt head system and then select the
system again. If the lamp continues to flash even after taking this step, check the pan/tilt
head system's power supply and cable connections.
Press the MEMORY button to register settings in the preset memories of the pan/tilt
head system or registering the limiter, shutter speed or other settings. For more details,
refer to the description of each function concerned.
10 (E)