Haier AS20S2SF1FA Bedienungsanleitung Seite 12

Operation
HEALTH Operation
TIMER
FAN MODE
SMART
10℃
Press HEALTH button for twice press,
disappears, the operation stops.
When indoor fan motor is running, it has healthy
process function. (It's available under any mode)
When the fan in the indoor unit does not work, the
health lamp lights up, but the anion generator does
not release anion.
9
(This function is unavailable on
some models)
The water-ion generator in the
airconditioner can generate a lot
of anion effectively balance the
quantity of position and anion in
the air and also to kill bacteria
and speed up the dust sediment
air in the room.
Press HEALTH
button
For each press, is displayed
Air conditioner starts health anion
function operation.
ON/OFF operation and test operation
ON/OFF Operation:
Use this operation only when the remote controller is
defective or lost, and with function of emergency running,
air conditoner can run automatically for a while.
When the emergency operation switch is pressed, the
"Pi" sound is heard once, which means the start of this
operation.
emergency operation starts, the unit will run automatically in
the following modes:
Room Designated Timer
temperature temperature mode
Above 24 ºC 24 ºC No
Below 24 ºC 24 ºC No
It is impossible to change the settings of temp. and fan
speed, It is also not possible to operate in timer or dry mode.
Test operation:
est operation switch is the same as emergency switch.
T
Use this switch in the test operation
when the room temperature is below
16 ºC, do not use it in the normal
operation.
Continue to press the test operation
switch for more than 5 seconds.
After you hear the "Pi" sound twice,
Loading of the battery
1
Remove the battery cover;
2
Load the batteries as illustrated. 2 R-03 batteries,
resetting key (cylinder); Be sure that the loading is
in line with the "+"/"-";
3
Load the battery, then put on the cover again.
Fan Operation
speed mode
Pi
AUTO COOL
AUTO HEAT
Pi Pi