TaoTronics TT-BH077 Anleitung Seite 7

Power On (Fig. 8)
Uncover the lid and they will power on automatically.
8
L R
Power Off (Fig. 9)
Put the earbuds into the charging case and close the lid, they will turn off
automatically.
9
L
L R
Pairing
• You can use one earbud or both earbuds as per your preference. Please
refer to the corresponding pairing instructions.
• Before pairing, please turn off other Bluetooth devices and place the device
to be connected close to the earbuds.
05
R
• When the earbuds are disconnected from your device for more than 10
minutes, they will turn off automatically.
Couple Earbuds Mode
1. Uncover the lid to turn on the earbuds, they will connect with each other
automatically. Once connected, The LED indicators on both earbuds will
flash blue and white alternately indicating the earbuds are in pairing mode
now.
2. Turn on the Bluetooth function on your device and search for nearby
devices. Find "TAOTRONICS SoundLiberty 77" in the searching results, tap
on the name to connect.
3. Once connected, the LED indicators on both earbuds will flash blue slowly.
Note:
• We recommend you to take out the earbuds from the charging case only
when the earbuds complete automatic pairing in the charging case.
• If the earbuds failed to pair with each other, please disconnect the
Bluetooth connection with your device, put them back into the charging
case, close the lid then open it to pair again.
• It is not recommended to wear the two earbuds on different people. If
needed, please keep the 2 earbuds within 3 meters / 9.8 feet in couple
earbuds mode.
Single Earbud Mode
1. Take out one earbud from the charging case, and make sure the other one
is placed in the charging case and the lid is covered.
2. It will try to pair with the last paired device first then enter pairing mode
with its LED indicator flashing blue and white alternately if pairing failed.
3. Turn on the Bluetooth function on your device and search for nearby
devices. Find "TAOTRONICS SoundLiberty 77" in the searching results, tap
06