Appliance Description; Assembling The Appliance - Lentz 29014 Bedienungsanleitung

• Never expose the hand-held blender
at high temperature (heating etc.) or
climatic conditions (Rain etc.).
5. Items delivered
The following is included in the items
delivered:
1 Hand blender
1 Blender-attachment
1 operation manual

6. Appliance description

1 – Drive unit
2 – Blender-attachment
2
7. Technical Data
Model:
Nominal voltage
Safety class:
Nominal power:
Short operating time:
The short operating time specifies the
time for which one can operate the
appliance without the motor getting
overheated and damaged. After this,
the device must remain switched off for 5
minutes until the motor has cooled down.
Switch on the device again only after
that.
12 - EN
29014 HB-128 Bedienungsanleitung.indd 12
1
HB-128
220-240V, 50/60 HZ
II
300 Watt
1 Minute
WARNING!

Assembling the appliance

The immersion blender has a sharp
blade, which can lead to severe injuries.
• Pull out the mains plug from the
electrical socket before you mount or
remove the attachments/drive unit on
the hand-held blender.
1) Insert the blender-attachment (2)
on the drive unit (1), and rotate it in the
clockwise direction until the blender
attachment- (2) latches audibly. Thus,
orient yourself according to the picto-
gram on the blending attachment (2)
and the drive unit (1). Please note that
the attachment is completely latched
and sits safely.
For detaching the blender-attachment,
follow the below procedure:
2) Rotate the blender attachment (2) in
clockwise direction in order to unlock it.
3) Remove the blender-attachment from
the drive unit.
8. Unpacking and checking of
the appliance
Choking hazard!
Packaging material is not a toy. Children
are not allowed to play with the plastic
bags. There is a choking hazard.
27.03.19 12:02