Before The First Use; Using The Device; Cleaning And Maintenance - Marta MT-1554 Bedienungsanleitung

BEFORE THE FIRST USE

 Unpack the appliance and remove all packaging materials and labels.
 Clean the motor block with a damp cloth, clean the accessories in soapy water rinse thoroughly and dry.
 Set proper accessory, aligning arrow on the accessory and an open lock icon on the handle and turn it clockwise up to the stop.

USING THE DEVICE

SPEED SELECTION
 Press speed mode button I to set medium speed
 Press speed mode button TURBO to set maximum speed
I. USING BLENDER
 Set blender accessory
 Place the accessory in the cup with the product, hold the handle
 Connect the device to the mains, select the proper speed
- Press speed mode button I for medium speed
- Press speed mode button TURBO for maximum speed
 Move blender in the cup in a circular motion for proper grinding
 Don‟t allow any liquid reaching device handle
 In case cutting blades are blocked, unplug the appliance from the mains
 After use, remove blender from the mains and disconnect the accessory
II. USING WHISK
 Connect upper and metal parts of the whisk
 Fix handle on the upper part of the whisk
 Place product inside of the cup
 Turn device on. Choose proper speed
 After use plug device out from the mains and disconnect the whisk
III. USING CHOPPER
 Fix chopper blades inside of the chopper cup, add products
 Place the cover and motor block and fix it tight.
 Connect the device to the mains, choose proper speed
 After use plug device out from the mains and disconnect the chopper

CLEANING AND MAINTENANCE

 Before cleaning, always unplug the appliance.
 Use wet cloth to clean the motor block. Do not immerse the appliance in water or other liquids.
 Clean accessories in soapy water and dry.
 Do not use chemical and abrasive cleaners for cleaning.
 Recommended to clean the device right after operating to avoid coloring of plastic parts.
7