Synology DS series Installationsanleitung Seite 7

INSTALL HARD DISK
DS107+/DS107/DS107e requires one 3.5" SATA hard disk for installation. Refer to the following steps for
details:
Warning! If you use a hard disk with data on it to install, system will format
the hard disk and erase all data in some cases. Please back up the data if
you need it in the future.
1
Connect the HDD Data Cable and HDD Power Cable to the hard disk.
2
Place the server horizontally on a desk. The rear panel should be facing you.
3
Push to slide away the upper case.
7