Sony Ericsson HBH-30 Handbuch Seite 9

HBH30_EN.book Page 8 Wednesday, February 6, 2002 10:16 AM
To pair the headset (general instructions)
1. Prepare your phone according to the phone's user
documentation on pairing.
2. Press
for up to 10 seconds until the indicator
light on the headset flashes green and red. The headset
is now ready for pairing.
3. Continue according to the instructions in the phone's
user documentation. The headset passkey is 0000.
To pair the headset with a Sony Ericsson or
Ericsson phone
1. With the headset turned off, press and hold
up to 10 seconds until the indicator light on the headset
flashes green and red.
2. In the phone, scroll to Extras or Connect,
Bluetooth, YES , Paired devices, YES , Add device,
Phone initiates, .
YES
3. A list of device types that you can pair with your phone
appears. Scroll to Headset and press
YES
the headset are not too far apart.
4. HBH-30 appears in the display. Press
5. Enter the headset passkey (0000) and press
phone pairing procedure starts.
6. You may now replace the given headset name with a
personal name tag and then press YES . When pairing has
been completed, the headset indicator light flashes green.
8 Preparing the headset
Resetting the headset
You may want to reset the headset to its default
settings. This also clears all current pairings.
To reset the headset
1. With the headset turned off, press and hold
up to 10 seconds until the indicator light on the headset
flashes green and red. Then release the button.
2. Press and hold
followed a moment later by another two beeps. The
headset is now turned off. Keep the headset off for
for
at least 30 seconds. The headset has now been reset.
YES ,
YES ,
. Make sure
YES .
. The
YES
for
again until you hear two beeps,